Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
11 PROGRAMMED PLAYBACK
Use this function to program the tracks to play in a certain order.
Up to 25 tracks per disc can be programmed.
Programs for up to six discs can be stored in the permanent memory.
Inputting programs
Set the program operation selection mode.
1
Press the PROGRAM button.
Select "Program In?".
2
Turn the data master knob (
Set the program input mode.
Press the data master knob (
PUSH ENTER
3
Select the track you want to program.
Turn the data master knob (
[Example: When track 3 is selected]
4
PUSH ENTER
Program the selected track.
Press the data master knob (
PUSH ENTER
5
To program other tracks, repeat steps 3 to 5.
6
"Program Full" appears on the character display if you
attempt to program a 26th track.
[Canceling the program input mode]
Press the PROGRAM button.
• If no program has been input, the player returns to the
normal status.
7
• If a program has been input, the player returns to the
program operation selection mode. (The player returns to
the same status as in step 11.)
• If the PROGRAM button is pressed again, the player
returns to the normal status.
22
8
—
9
).
—
).
8
9
Flashing
m
s
f
Select Tr?
—
).
8
9
Flashing
m
s
f
—
).
8
9
Lit
m
s
f
Changing programs
[Changing programmed tracks]
Select the program step number you want to change.
Turn the data master knob (
8-
1
[Example: To change program step number 12]
Change Tr?
Set the program step number to be changed.
Press the data master knob (
8-
2
Select Tr?
• The player is set to the same status as in step 4 and a
new track can be selected.
[Inserting tracks in a program]
Select the program step number where you want to
insert a track.
Turn the data master knob (
9-
[Example: To insert a track at program step number 12]
1
PUSH ENTER
Set the program insert mode.
Press the PITCH BEND + button.
+
-
9-
2
PITCH BEND
• The player is set to the same status as in step 4 and an
additional track can be selected.
[Clearing a programmed track]
10
Select the program step number you want to delete.
-
1
Turn the data master knob (
10
Clear the step from the program.
-
Press the PITCH BEND – button.
2
8
—
9
).
m
s
f
—
).
8
9
Flashing
m
s
f
8
—
9
).
m
s
f
Change Tr?
Flashing
m
s
f
Insert Tr?
8
—
9
).
Publicidad
Capítulos
Tabla de contenido
