I Playing A Disc; Basic Playback; Cancelling And Calling Back Pbc Function; General Features - Denon DVM-2815 Instrucciones De Operación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

PLAYING A DISC

Basic Playback

DVD-A
Getting started
Turn on the power of the TV, amplifier and any other com-
ponents which are connected to the DVD.
Make sure the TV and audio receiver (commercially avail-
able) are set to the correct channel.
1
Press the POWER ON button.
• "P-ON" will appear briefly on the display panel.
2
Press the OPEN/CLOSE button to open disc load-
ing tray.
3
Press the DISC SKIP button repeatedly or press
the DISC NUMBER button.
• The desired disc tray moves to the front position.
4
Place the disc in the tray,
with the label facing up.
• Repeat steps 3 and 4 to
load more discs.
5
Press the PLAY button.
• The tray will close automati-
cally, and playback will then
start from the first chapter or
track of the disc. If the playback does not start automat-
ically, press the PLAY button.
• If the disc has not been set on the tray, the DVD player
will play the disc which is set on the right side tray.
• When you want to select the other disc, press the DISC
SKIP button repeatedly or the DISC NUMBER button
for your desired disc.
• When you playback the DVD with a title menu is
recorded, it may appear on the screen. In this case,
refer to "TITLE MENU".
6
Press the STOP button to stop playback.
NOTES:
• A "prohibited icon" may appear at the top-right on the TV
screen during operation, warning that a prohibited opera-
tion has been encountered by the DVD player or the disc.
• With DVDs that use some titles for playback program
signals, playback may start from the second title, or it
may skip these titles.
• During the playback of two lay-
ered disc, pictures may stop for
a moment. This happens when
the 1st layer switches to the 2nd
layer. This is not a malfunction.
• The operation may vary when
you playback DVDs with disc
menu or Video CDs with PBC.
Refer to the manual accompanying the disc for details.
• You can open the tray and change 2 discs during play-
back by pressing the DISC EXCHANGE button.
• Disc position will be displayed on the TV screen for
about 5 minutes when you turn on the power or close
the tray.

CANCELLING AND CALLING BACK PBC FUNCTION

1
Insert a Video CD.
• Playback will start automatically.
2
Press the STOP button.
3
Press the numeric buttons to enter the desired
Track number.
• PBC function is now cancelled and the playback of the
Video CD will start.
4
To call back PBC function, press the STOP button
twice, and then press the PLAY button.
• Title menu will appear on the display.
DVD-V
VCD
CD
Right side tray
Left side tray
VCD

General Features

DVD may contain menus to navigate the disc and access
special features. Press the appropriate numerical key or use
the cursor buttons ( L / K / B / s ) to highlight your selec-
tion in the DVD main menu and press the ENTER button to
confirm.
NOTE:
• Unless stated, all operations described are based on
remote control use. Some operations can be carried
out using the menu bar on the TV screen.

Brightness of the Front Display

The brightness of the front display can be adjusted from the
SETUP menu. Details are on page 25.

Pause

DVD-A
1
During playback, press the
STILL/PAUSE button.
• Playback will pause and sound
will be muted.
2
To continue playback, press the
PLAY button.

Disc Menus

1
Press the MENU button.
• The DVD main menu will appear.
2
If the feature is not available,
appear on the TV screen.
3
If disc menu is available on the disc, audio lan-
guage, subtitle options, chapters for the title and
other options will appear for selection.
4
Press the cursor buttons ( L / K / B / s ) to select
an item, and the ENTER button to confirm selec-
tion.

Title Menu

1
Press the TOP MENU button.
• The title menu will appear.
2
If the feature is not available,
appear on the TV screen.
3
Press the cursor buttons ( L / K / B / s ) to select
an item, and the ENTER button to confirm selec-
tion.
• Playback will begin at the selected Title.
1
When playing a Video CD with PBC func-
tion, the title menu will appear automatically.
2
Press the numeric buttons to select the desired
title.
• Playback will begin at the selected title.
3
Press the RETURN button to go back to the title
menu.
– 16 –
DVD-V
VCD
CD
MP3
WMA
DVD-V
symbol may
DVD-A
DVD-V
symbol may
VCD
F
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido