Opening And Closing The Disc Holder And Loading Discs; Normal Playback - Denon DCD-201SA Instrucciones De Operación

ENGLISH
8 OPENING AND CLOSING THE DISC HOLDER AND
LOADING DISCS
ON / STANDBY
1
Turn on the power.
(Main unit)
5
Press the disc holder
open/close button.
2 (Main unit)
• The disc holder opens.
• When pressed in the standby mode, the
power turns on automatically and the disc
holder opens.
Being careful not to touch the disc's data
surface, set the disc in the disc tray with the
labeled side facing up.
Make sure the disc holder is fully open when
3
loading discs.
Set 12 cm discs in the outer disc guide (Fig.
1), 8 cm discs in the inner disc guide (Fig. 2).
Make sure the disc is flat.
5
Press the disc holder
open/close button to
close the disc holder.
(Main unit)
4
• When the disc holder closes, the total number
of tracks on the disc and the total playing time
appear on the display, and the numbers on the
music calendar light up to the number of
tracks on the disc.
1 3
When the play button is
pressed after a disc is set
on the disc tray, the disc
holder closes and
(Main unit)
playback starts.
NOTES:
• Be sure to turn the power on when opening and closing the disc holder.
• If your finger or another object should get caught in the disc holder, stay calm and press the disc holder open/close
button ( ).
5
• Do not put foreign objects in the disc holder. Doing so could result in damage.
• Do not press on the disc holder when the power is turned off. Doing so could damage it.
• To not press buttons with pencils, etc.
10
All manuals and user guides at all-guides.com
POWER
(Remote
control unit)
C
5
INDEX
ON / STAND BY TRACK
OPEN/
CLOSE
Disc holder open/close button
(Remote
control unit)
Figure 1
5
BY
ON / STAND
12 cm disc
OPEN/
CLOSE
(Remote
control unit)
Figure 2
5
STAND BY
ON /
(Remote
control unit)
8 cm disc
9

NORMAL PLAYBACK

(1) Starting Playback
Disc tray
2
1 3
ON / STANDBY 5
7/9
8/6
201SA
ER DCD-
DISC PLAY
TIME COMP ACT
S TRACK
M
1 2
Disc holder
2
Outer disc
guide
POWER
1
2
1 3
3
7/9
8/6
C
201S A
ER DCD-
DISC PLAY
TIME PACT
S COM
INDEX M
TRAC K
(2) Stopping Playback
ON / STANDBY 5
TRACK
Inner disc
guide
2
1 3
7/9
8/6
C
1
A
201S
ER DCD-
DISC PLAY
TIME COM PACT
S
INDEX M
TRAC K
NOTES:
• Zeros are displayed if no disc is loaded or if the disc is
loaded upside-down.
• The total remaining time and the remaining time per track
are not displayed if the disc data cannot be read properly due to scratches or dirt on the disc. In this case, some
time may be required for finding the beginnings of tracks, etc.
• When the disc holder open/close button (
on, the disc holder closes and the play mode is set.
• Do not use discs with cellophane tape on them, rental discs on which there is glue seeping out from under the
label, or discs on which there are traces of labels that have been peeled off. If such discs are loaded, they may get
stuck inside the player and cause damage.
2 3
1 3 2 1
Turn on the power.
C
8/6 7/9
INDEX TIME
M
S
COMPACT DISC PLAYER DCD-201SA
Load the disc.
2
CALL PROG DIRECT For instructions on loading discs, refer to
"OPENING AND CLOSING THE DISC
1 2 3
HOLDER AND LOADING DISCS" (Page 10)
4 5 6 7
8 9 10 +10
TIME
Press the play button.
3
REPEAT
• Playback starts.
1
During playback, press
the stop button.
1 3 2
C
• Playback stops.
8/6 7/9 1
INDEX TIME
Playback also stops automatically after the
M S
COMPACT DISC PLAYER DCD-201SA
last track on the disc has been played.
REPEAT
RANDOM
REMOTE CONTROL UNIT RC-268
) or play button ( ) is pressed in the standby mode, the power turns
5 1
ON / STANDBY
POWER
(Main unit) (Remote
control unit)
5
OPEN/
CLOSE
(Main unit) (Remote
control unit)
1 3
(Main unit) (Remote
control unit)
2
(Main unit) (Remote
control unit)