auna Silverstar Amp Manual Del Usuario página 53

CD
To enter CD mode, either press mode and rotate the knob to cycle through
the listening modes until CD is displayed, or select Menu > Main menu >
CD. The CD menu offers the following options:
• Shuffle (Off /on)
• Repeat (Off / Repeat one / Repeat all)
• Main Menu
The display screen for the CD function will show "Loading..." followed by
"Reading ","No Disc".
Select the Open/Close CD function on the radio or the remote. Insert your
CD slightly and drive will take CD into the system to play.
The first song on the CD will now begin to play, and show the playing time.
Press info button at remote repeatedly or OK button in the main unit, if
the format with ID3, it will show the info( Today's date, File, Folder, Album,
Artist, Title).
CD functions
To skip between songs, use the previous or next buttons on the radio or
the remote. Pause/Play using the button on the radio or remote to play or
pause.
To skip rewind/forward through a song playing, hold down the 'previous or
next buttons on remote control and release when you wish to stop skipping.
To put the CD into the device, just slightly push the CD and the drive will
take the CD in. To eject the CD, press Eject key on the radio or on the
remote, as per the guidance to enter the CD.
Arrange a CD song program
When the CD is playing, press 'Stop' button, you can program the CD player
to play songs in a particular order. Simply follow by pressing "Program"
button on the remote to step into the state of programming. The star icon is
shown.
Once in program settings, the display will show T001 to display the first
song on the CD as P01. You can now choose what song you would like as
program number P01 by using the '<<' and '>>' buttons to scroll through to
the song you would like to choose. Once on the chosen song for P01, press
the 'Program' and be taken to choose your next programmed song.
For the next song, the display will show T002 to show the program 2. Now
EN
53