auna Silverstar Amp Manual Del Usuario página 57

time is displayed at the bottom of the screen. Alternatively select Menu >
Main menu > Sleep and select from the sleep time options. Once you select
a sleep period, the system returns to the main menu. Press and hold the
Menu to return to the now playing screen. To cancel a sleep time, select
Sleep OFF from the sleep options using either of the above methods.
Note: A sleep time is automacatically cancelled if radio put into Standby.
Alarms
To set or change an alarm, select Menu > Main menu > Alarms.
Select the alarm number (1 or 2) then configure the following parameters:
• Enable: Off, Daily, Once, Weekends or Weekdays
• Time: 12:00 AM (adjust as necessary)
• Date: (adjust as necessary – this option is usually hidden and only
required if 'Once' is selected in the Enable field).
• Mode: Buzz, Internet radio, DAB or FM
• Preset: Last listened or 1-40
• Volume: 0- 32
• To save these settings and set the alarm, scroll down and select save.
Notes
• If you press Back or Menu to exit the Alarm settings without saving, a
dialogue screen is displayed asking if you wish to save the changes or
not.
• The now playing, screen shows active set alarms with an icon at the
bottom left.The standby screen shows active set alarms with an icon.
At the set time, the alarm will sound. To temporarily silence it, press OK
knob.
• Pressing the OK knob repeatedly cycles through the available snooze
periods: 5 Mins, 10 Mins, 15 Mins, and 30 Mins. The radio returns to
standby for the set period, with the silenced alarm icon flashing and a
countdown of the remaining snooze period. After the set snooze time
the alarm will sound again.
• During a snooze period, to change the snooze time, press OK knob to
select a new snooze time. Any remaining snooze time is reset to the
selected time period.
• To cancel a sounding alarm, or an alarm in snooze, press Standby.
EN
57