Usb Mode - auna Silverstar Amp Manual Del Usuario

EN
54
use the '<<' and '>>' buttons to scroll through to the song you would like
to choose. Once on the chosen for program 2, press the 'Program ' and be
taken to choose your next programmed song.
After you have finished program song selection, press the Play/'Pause '
button to play the songs which have been programmed.
When the program playback is activated, press twice on Stop button, then
it will exit the program playback mode, back to CD playing.

USB MODE

USB mode plays audio from an external source such as an MP3 player.
To enter USB mode, either press mode and rotate the knob to cycle through
the listening modes until USB is displayed, or select Menu > Main menu >
USB.
The USB Audio menu offers the following options:
• Shuffle (Off /on)
• Repeat (Off / Repeat one / Repeat all)
• Main Menu
• To skip between songs, use the previous or next buttons on the radio or
the remote. Pause/Play using the button on the radio or remote to play
or pause.
• To skip rewind/forward through a song playing, hold down the
'previous or next buttons on remote control and release when you wish
to stop skipping.
• Arrange a USB song program
• When the USB is playing, press 'Stop' button, you can program the USB
to play songs in a particular order.
• Simply follow by pressing "Program" button on the remote to step into
the state of programming. The star icon is showed.
• Once in program settings, the display will show T001 to display the first
song on the USB as P01. You can now choose what song you would
like as program number P01 by using the '<<' and '>>' buttons to scroll
through to the song you would like to choose. Once on the chosen
song for P01, press the 'Program' and be taken to choose your next
programmed song.
• For the next song, the display will show T002 to show the program
2. Now use the '<<' and '>>' buttons to scroll through to the song you
would like to choose. Once on the chosen for program 2, press the
'Program ' and be taken to choose your next programmed song.
• After you have finished program song selection, press the Play/'Pause '