Grizzly Tools ERV 1201-31 ZV Set Traducción Del Manual De Instrucciones Original página 52

Escarificador eléctrico/aireador de césped
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 115
GB
• Only remove plant parts when
the implement is standing com-
pletely still. Ensure that the
grass ejector opening is clean
and free.
• Switch off the power when the
implement is to be transported,
lifted or tilted and when travers-
ing other surfaces than grass.
• Never leave the implement un-
attended at the place of work.
Children should be supervised
to ensure that they do not play
with the appliance.
• Always switch off the imple-
ment and disconnect the power
plug:-
- Whenever you leave the im-
plement
- Before you clean the ejector
opening or unblock or unclog
the implement
- When the implement is not
being used
- During all maintenance and
cleaning work
- When the power cable is
damaged or has become
tangled
- When the implement hits
an obstruction during work
or when unusual vibrations
arise. Establish the cause
and see if the implement
has been damaged. Do not
repair it yourself! Have the
implement repaired by an
authorised workshop!
• Store the implement in a dry
place well out of reach of chil-
dren.
52
CAUTION! The following
states how to avoid damage
to the implement and any
resulting harm to people:
Take care of your implement:
• Switch off the power when
the implement is to be carried
across steps.
• Inspect the implement each
time before it is to be used.
Never operate the implement
if safety devices (e.g. impact
protector, parts of the cutting
facility or bolts are missing,
worn out or damaged. Check
especially the power cable and
starting lever for damage. To
avoid imbalance, all tools and
bolts must be exchanged as
complete sets.
• Only use spare parts and ac-
cessories that have been sup-
plied or recommended by the
manufacturer. The use of alien
parts results in the immediate
loss of all guarantee claims.
• Ensure that all nuts, bolts and
screws are firmly tightened and
that the implement is in a safe
working state.
• Never try to repair the imple-
ment yourself, other than you
have been trained accordingly.
All work that has not been
listed in these Instructions must
only be carried out by author-
ised servicing agencies.
• Treat the implement with the
greatest care. Always keep the
tool clean for better and safer
work. Follow the maintenance
instructions.

Publicidad

Tabla de contenido
loading

Tabla de contenido