Use The Memory Function; Last 3 Tests Average; To Read The Memory Values; To Delete The Memory Value - Norditalia BP-500 Manual De Uso

Note:
When a person's systolic and diastolic pressures fall into different categories,
the higher category should apply.

Use the Memory Function

After every measurement the appliance memorizes the measured blood
pressure and pulse rate with date and time. It can store up to
BP-500: 120 sets of measurements (60 for each of the 2 memory areas).
When all sets of an area are full, the oldest memory will be deleted. The unit also
calculates the average of last 3 measurements.
Please select desired memory area before reading the memory.

Last 3 Tests Average

With power off, press the "" M "" button to activate screen display.
The device will display the average of the last 3 readings.
The " " symbol will appear.
Press "M" again to cycle through memories.
Select the desired memory area first.

To read the memory values

Press "M" again to cycle through memories.

To delete the memory value

13