Cooling Function; Ionisation Function - Silvercrest SHIP 2000 A1 Manual Del Usuario

__291951_Haartrockner_mit_Ionenfunktion_AC_B8.book Seite 17 Donnerstag, 21. Dezember 2017 10:07 22
the display 5 of the temperature dis-
play 15.
• Use the buttons for the temperature
settings +/– 12 to select the desired
temperature setting.

Cooling function

In order to improve the durability of your
sections of hair, you can cool the hair after
it has been styled with hot air using the but-
ton 14.
• Switch on the cooling function by press-
ing the button
order to achieve a cool air flow inde-
pendent of the initial temperature.
On the display 5 the symbol for the
cooling function
the temperature display 15 shows the
decreasing temperature.
• When you no longer require the cool
air flow, press the button
The symbol for the cooling function
18 goes off.

Ionisation function

You can use the button for the ion
function 8 to additionally activate the
ionisation function with every operating
mode. This then continuously applies ions to
the hair.
This reduces the static loading of the hair
and improves its stylability.
The hair becomes soft, smooth, glossy, and
easier to style.
• Press the button for the ion function
8 to switch on the function. On the
display 5 the symbol for the ion function
17 is shown.
• To switch off the function, press the button
for the ion function
symbol for the ion function
off.
NOTE: for the optimal ion activity, we rec-
ommend the use without attachments.
14 during drying in
18 is shown and
14 again.
8 again. The
17 goes
Styling attachment
The styling attachment 2 makes it possible to
direct the air flow onto specific sections of
hair.
1. Figure B: place the styling attach-
ment 2 onto the front of the hair dry-
er 4 so that it locks into place.
2. The styling attachment 2 can be rotat-
ed into any position desired.
3. Do not remove the styling attachment 2
from the hair dryer 4 until it has cooled
down.
Diffuser
Use the diffuser attachment 1 to create curls
and gentle waves in the lengths and tips, as
well as for body and volume at the hairline.
1. Figure C: place the diffuser 1 onto the
hair dryer 4.
2. Switch on the hair dryer 4.
3. Use:
- For long hair: draw diffuser 1
through to the tips, and style the hair
into gentle waves in the direction of
the roots.
- For short hair: use the diffuser 1 to
work on the hair around the roots,
generating body and volume.
4. Do not remove the diffuser 1 from the
hair dryer 4 until it has cooled down.
17
GB