Tips for better shaving
Apply the whole system outer foil
perpendicularly against the skin and
shave by slowly gliding the shaver over
the face against the grain of the beard.
• The beard under the chin and around
the throat can be shaved better by
stretching the skin so the beard will
stand.
• To prevent damaging the system
outer foil, do not shave with only a
part of the system outer foil.
2
Press
when finished.
While using
The used time and
remaining battery capacity
are shown and then turn off
after 7 seconds.
• The shown time returns to
[0'00"] after 10 minutes.
• The shaving sensor lamp
(
) blinks.
ES-LV9N_EU.indb
15
After use
The used time and
remaining battery capacity
blink alternately and then
turn off after 8 seconds.
When the battery capacity is low
"10%" appears and "
" blinks.
• You can shave 1 to 2 times after "10%"
appears. (This will differ depending on usage.)
Notes
• The appliance may not operate in an ambient temperature
approximately 5 °C or lower.
• The shaving sensor may not respond depending on the type
and quantity of the shaving gel. This is not abnormal.
• Depending on the beard thickness or the amount of beard
trimmings in the shaver head, the shaving sensor may not
react and the driving sound may not change. This is not
abnormal.
• To prevent erroneous operation, place your fingers on the
finger rest while using the shaver.
• The sonic vibration cleaning mode is activated when the
power switch is pressed for more than 2 seconds while the
shaver is not operating (the switch lock is unlocked).
(See page 18.)
You cannot shave in this mode.
15
2015/12/11
13:05:53