Setting The Time, Date And Temperature Units; Sunrise Alarm Settings; Sad Light Operation - i-box Shine Manual Del Usuario

Setting the Time, Date and Temperature Units

Time can only be set In standby mode (when natural sounds, radio and the light are off).
1. To enter setting mode press and hold the Time/Snooze/Preset key
2. Use the , keys to choose the Hour and press
19 20
3. Repeat the process to set: Minutes > 12/24Hr Clock Format > Year > Month > Day > Week Day Language >
°C/°F Temperature Units
Press the Sunset/Back key

Sunrise Alarm Settings

The Alarm can only be set In standby mode (when natural sounds, radio and the light are off).
The sunset alarm acts like a standard alarm but the light will also come on at a set time before the alarm
sounds. The light will gradually brighten as the alarm time approaches - you can set how long before the
alarm the light first comes on and how bright the light will be when the alarm sounds.
1. Long Press the Sunrise Alarm
2. Press the ,
19 20
3. Press the Sunrise Alarm
(If the Shine is set to a 12Hr clock display make sure PM is not displayed if you want to select an AM alarm time.)
4. Use the , keys to select the minutes, press the Sunrise Alarm
19 20
to the next step.
5. Repeat the process, using the
confirm a setting and to set: > Lamp brightness level (1-10/OFF) >
Lamp Brightening Time, before the alarm sounds (-5/-10/-15/-20/-25/-30) >
Audible Alarm Type: Soundtrack
6. Short press the Sunrise Alarm
displayed when alarm is set to ON.
Please Note: If you just want a standard audible only alarm and don't want the lamp to come on select OFF
when setting Lamp brightness you can then set the type of alarm and volume.
Alarm Stop / Snooze
Short press Time/Snooze/Preset key
Press , or
14 15
switch off the alarm, the alarm icon

SAD light operation

Short press the SAD light control key
press repeatedly to cycle through levels 1-10 and OFF.
Long press SAD light control key
Sunset sequence / Sleep mode
The sunset feature will gradually reduce the brightness of your Shine's lamp over the Sunset period set.
Switch the lamp on first to set, if at the same time you are playing the FM radio or a Soundtrack these will also
switch off at the end of the period set.
If you just want to switch off a Soundtrack or the radio after a set period you can use the same method just
switch off the lamp first before setting.
1. Short Press the Sunset/Back key
2. Long Press (unset/Back key
3. Short press ,
19
4. Short Press key to confirm and exit
17
Please Note: There is no reduction in volume of the audio over the time period set.
06 | Shine
to return to the previous setting.
18
key for more than 2s to enter the Sunrise Alarm setting mode
13
keys to adjust the Sunrise Alarm Hour up or down
key to confirm and move to the next step
13
, keys to select a setting and the Sunrise Alarm
19 20
(1/2/3/4)/Beep
key to switch the alarm ON/OFF. Alarm ON icon
13
while the alarm is sounding to delay the alarm for 9 minutes.
17
key to stop the alarm until the next day. Press the Sunrise Alarm
18
will no longer be displayed.
27
to switch on the SAD Lamp to the level previously set then short
12
for more than 2 seconds to switch off the SAD lamp.
12
to toggle Sunset/Sleep mode On/Off
18
to enter Timer setting
18
keys to select time period: 05/10/15/20/25/30/35/40/45/50/55/60min
20
for 2 seconds.
17
to confirm.
17
key
/FM Radio Preset (P01-P20) > Alarm Volume (2-16)
to confirm and move
13
key to
13
will be
27
key to
13