Additional Information
Specifications
Amplifier section
Rated Power
Output at Stereo
(8 ohms at 1 kHz, THD
Mode
Reference Power
(8 ohms at 1 kHz, THD
Output
Front: 60 W/ch
Center: 60 W
Surround: 60 W/ch
Frequency
TV/SAT, CD, MD/TAPE,
response
Inputs
Sensitivity
CD,
DVD/
MULTI CH,
150 mV
MD/TAPE,
TV/SAT,
VIDEO
20
GB
Outputs
0.7%)
50 W + 50 W
10%)
Muting
TONE
VIDEO, DVD/MULTI
Tuner section
+0.5
CH: 10 Hz - 50 kHz
dB
FM stereo, FM/AM superheterodyne tuner
–2
FM tuner section
Impedance
S/N
Tuning range
Antenna terminals
50
85 dB
kilohms
Intermediate
frequency
Sensitivity
Usable sensitivity
S/N
Harmonic
distortion at
1 kHz
Separation
Frequency
response
Selectivity
AM tuner section
MD/TAPE OUT:
Voltage: 150 mV,
Tuning range
Impedance: 10 kilohms
VIDEO AUDIO OUT:
Voltage: 150 mV,
Impedance: 10 kilohms
SUB WOOFER:
Antenna
Voltage: 2 V
Impedance: 1 kilohms
Intermediate
PHONES: Accepts low
frequency
and high impedance
headphones
Usable sensitivity
Full mute
S/N
±6 dB at 100 Hz and
Harmonic
10 kHz
distortion
Selectivity
* You can change the AM tuning interval
between 9 kHz and 10 kHz. Turn off the
87.5 - 108.0 MHz
receiver and press ?/1 (power) for more
than 4 seconds until "INITIAL" appears.
75 ohms, unbalanced
1) After tuning in any AM station, turn
10.7 MHz
2) Hold down PRESET TUNING +
Mono: 18.3 dBf, 4.5 µV
Stereo: 38.3 dBf, 45 µV
To change to 10k Step, repeat step 1 and 2
until "10k STEP" appears. Note that all
11.2 dBf, 1 µV (IHF)
preset stations, index names and sound
field are cleared after you make the
Mono: 76 dB
procedure above.
Stereo: 70 dB
Mono: 0.3 %
Stereo: 0.5 %
45 dB at 1 kHz
+0.5
30 Hz - 15 kHz
dB
–2
60 dB at 400 kHz
530 - 1610 kHz (10 kHz
step)*
531 - 1602 kHz (9 kHz
step)*
Loop antenna
450 kHz
50 dB/m (at 999 kHz)
54 dB (at 50 mV/m)
0.5 % (50 mV/m, 400 Hz)
At 9 kHz: 35 dB
At 10 kHz: 40 dB
off the receiver.
button and press the ?/1 (power)
button. "9k STEP" appears.