Specifications - Sony STR-DE335 Manual De Instrucciones

Additional Information

Specifications

Amplifier section
Power output
Stereo mode
Canada model:
(8 ohms 20 Hz - 20 kHz,
less than 0.09% total
harmonic distortion)
Australia, Singapore and
Malaysia models:
Rated power: (8 ohms at
Reference power:
(8 ohms 20 Hz - 20 kHz,
Other countries:
Rated power: (8 ohms at
Reference power: (8 ohms
Canada model:
Surround mode
(8 ohms at 1 kHz, THD
and 5.1 CH/DVD
(Reference)
Front: 80 W/ch
Center: (Pro Logic mode)
Rear: 80 W/ch
Other countries:
Rated power: (8 ohms at
Front: 80 W/ch
Center: (Pro Logic mode)
Rear: 80 W/ch
Reference power: (8 ohms
Front: 70 W/ch
Center: (Pro Logic mode)
Rear: 70 W/ch
RMS power: (8 ohms at
Front: 100 W/ch
Center: (Pro Logic mode)
Rear: 100 W/ch
Frequency
TV/SAT (TV/LD), CD,
response MD/TAPE, VIDEO,
5.1 CH/DVD:
20 US
Inputs
CD,
5.1 CH/
DVD,
MD/TAPE,
TV/SAT
(TV/LD),
VIDEO
Outputs
100 W + 100 W
1 kHz, THD 0.7%)
80 W + 80 W
less than 0.09% total
harmonic distortion)
70 W + 70 W
Muting
BASS BOOST
1 kHz, THD 0.7%)
100 W + 100 W
TONE
20 Hz - 20 kHz, less
than 0.09% total
Tuner section
harmonic distortion)
FM stereo, FM/AM superheterodyne tuner
95 W + 95 W
FM tuner section
Tuning range
0.8%)
Antenna terminals
80 W
Intermediate
frequency
Sensitivity
1 kHz, THD 0.7%)
Usable sensitivity
80 W
S/N
20 Hz - 20 kHz, less
Harmonic
than 0.09% total
distortion at
harmonic distortion)
1 kHz
Separation
70 W
Frequency
response
1 kHz, THD 10%)
Selectivity
100 W
AM tuner section
Tuning range
10 Hz - 50 kHz ±1 dB
Sensitivity Impedance S/N
50
250 mV 80 dB
kilohms
MD/TAPE REC OUT:
Voltage: 250 mV,
Impedance: 10 kilohms
VIDEO AUDIO OUT:
Voltage: 250 mV,
Impedance: 10 kilohms
WOOFER:
Voltage: 2 V
Impedance: 1 kilohms
PHONES: Accepts low
and high impedance
headphones
Full mute
+10 dB at 70 Hz
±8 dB at 100 Hz and
10 kHz
87.5 - 108.0 MHz
75 ohms, unbalanced
10.7 MHz
Mono: 18.3 dBf, 4.5 µV
Stereo: 38.3 dBf, 45 µV
11.2 dBf, 1 µV (IHF)
Mono: 76 dB
Stereo: 70 dB
Mono: 0.3 %
Stereo: 0.5 %
45 dB at 1 kHz
+0.5
30 Hz - 15 kHz dB
–2
60 dB at 400 kHz
Singapore, Malaysia and
Australia models:
531 - 1602 kHz (9 kHz
step)
Canada and other
countries:
530 - 1610 kHz (10 kHz
step)**
531 - 1602 kHz (9 kHz
step)
Antenna Loop aerial
Intermediate 450 kHz
frequency
Usable sensitivity 50 dB/m (at 999 kHz)
S/N 54 dB (at 50 mV/m)
Harmonic 0.5 % (50 mV/m, 400 Hz)
distortion
Selectivity
At 9 kHz: 35 dB
At 10 kHz: 40 dB
** You can change the AM tuning interval
between 9 kHz and 10 kHz. Turn off the
receiver and press 1/u (power) for more
than 4 seconds until "INITIAL" appears.
1) After tuning in any AM station, turn
off the receiver.
2) Hold down PRESET TUNING +
button and press the 1/u (power)
button. "9k STEP" appears.
To change to 10k Step, repeat step 1 and 2
until "10k STEP" appears. Note that all
preset stations, index names and sound
field are cleared after you make the
procedure above.
Video section
Inputs
VIDEO, TV/SAT (TV/
LD), 5.1 CH/DVD:
1 Vp-p 75 ohms
Output VIDEO, MONITOR:
1 Vp-p 75 ohms
General
System Tuner section: PLL
quartz-locked digital
synthesizer system
Preamplifier section:
Low-noise NF type
equalizer
Power amplifier section:
Pure-complementary
SEPP
Power Canada model:
requirements 120 V AC, 60 Hz
Australia model:
240 V AC, 50 Hz
Singapore and Malaysia
models:
230 V AC, 50/60 Hz