Ac Hookups; Before You Use Your Receiver - Sony STR-DE375 Manual De Instrucciones

AC Hookups

Connecting the AC power cord
Connect the AC power cord from this receiver and
from your audio/video components to a wall outlet.
Where do I go next?
Before you use the receiver, go to the next section to make
sure that all the controls are set to the appropriate positions.

Before You Use Your Receiver

Before you use your receiver for the first time or when
you want to clear the receiver's memory, do the
procedure below:
?/1 (power)
,
to a wall outlet
1
Turn off the receiver.
2
Press ?/1 (power) for more than 4 seconds.
"INITIAL" appears in the display and the items
including the following are reset or cleared:
• All preset stations are reset to their factory
settings.
• All sound field parameters are reset to their
factory settings.
• All index names (of preset stations and program
sources) are cleared.
• All adjustments made with the SET UP button are
reset to their factory settings.
• The sound field memorized for each program
source and preset station is cleared.
Turn on the receiver and check the following indicator.
• Press MUTING if MUTING appears on the
display.
• Press DIMMER repeatedly to set the display at any
of four levels of brightness.
Getting Started
DIMMER MUTING
9 GB