Ac Hookups; Before You Use Your Receiver - Sony STR-DE905G Manual De Instrucciones

VCR (via the VIDEO 1 jacks)
If you have two VCRs connect the second one to the VIDEO
2 jacks. If one of them has a StarSight tuner, be sure to
connect that one to the VIDEO 1 jacks.
Receiver
VIDEO 1
OUT IN
VIDEO VIDEO
OUT IN
AUDIO AUDIO
OUT IN
L
R
LD player
Receiver
LD
IN
VIDEO
IN
AUDIO
IN
L
R
Where do I go next?
Go on to the next section to connect the AC power cord and
complete your home theater system.

AC Hookups

If your amplifier has a voltage selector on the rear panel
Your amplifier operates on either 120, 220 or 240 V AC.
Before connecting the unit to a wall outlet, be sure to set the
VCR
voltage selector on the rear of the unit to the appropriate
OUTPUT INPUT
position according to your local power supply.
VIDEO VIDEO
AUDIO AUDIO
L
R
Connecting the AC power cord
Connect the AC power cord from this receiver and
from your audio/video components to a wall outlet.
If you connect other audio components to the
SWITCHED AC OUTLET(s) on the receiver, the
receiver can supply power to the connected
LD
components so you can turn on/off whole system
OUTPUT
VIDEO
when you turn on/off the receiver.
AUDIO
L
R
Caution
Make sure that the power consumption of the component(s)
connected to the receiver's AC outlet(s) does not exceed the
wattage indicated on the rear panel. Do not connect high-
wattage electrical home appliances such as electric irons,
fans, or TVs to this outlet.
Where do I go next?
Before you use the receiver, go to the next section to make
sure that all the controls are set to the appropriate positions.

Before You Use Your Receiver

Before you start using your receiver, make sure that
you have:
Getting Started
220V
240V
120V
• Turned MASTER VOLUME to the leftmost
position (0).
• Set the speakers to ON. (For details, see page 44.)
SWITCHED AC OUTLET(s)
/
to a wall
outlet
13 EN