Technoline WS 6502 Manual Del Usuario página 11

6. Please note all other clock/weather station settings cease to function when the clock is in RCC
synchronisation mode.
synchronising to set other clock and weather station function.
7. If the alarm goes off during synchronisation mode, RCC synchronisation will cease immediately.
Follow the above instructions again to set synchronisation.
RCC ZONE OFFSET
This clock is equipped with radio controlled time adjustment. The user will need to work out the time
zone signal they receive at their current location and make (any) adjustment as required. This function
also allows for daylight saving adjustment.
information.
1. Press"-/RCC" button (8) once for +1 time zone.
2. Press"-/RCC" button (8) once again for +2 time zone.
3. Press"-/RCC" button (8) once again for -1 time zone.
4. Press"-/RCC" button (8) once again for same time zone.
TO SET TIME MANUALLY
Hold down the "ALM SET" button (3) for approximately 3 seconds until the display is flashing.
1.
Press "+/C/F" button (4) or "-/RCC" button (8) to change the hour setting.
2.
Press "ALM SET" button (3) again. Press "+/C/F" button (4) or "-/RCC" button (8) to change the
3.
minute setting.
Press "ALM SET" button (3) again. Press "+/C/F" button (4) or "-/RCC" button (8) to change the
4.
year setting.
Press "ALM SET" button (3) again. Press "+/C/F" button (4) or "-/RCC" button (8) to select
5.
between the "month/date" and "date/month" setting.
Press "ALM SET" button (3) again. Press "+/C/F" button (4) or "-/RCC" button (8) to change the
6.
month setting.
Press "ALM SET" button (3) again. Press "+/C/F" button (4) or "-/RCC" button (8) to change the
7.
date setting.
Press "ALM SET" button (3) again. Press "+/C/F" button (4) or "-/RCC" button (8) to select
8.
between "am/pm" and "24- hour time" clock setting.
Press "ALM SET" button (3) again to change language setting.
9.
10. EN for English – GE for German – IT for Italian – FR for Frence – NE for Dutch – ES for Spanish –
DA for Danish.
11. Press "ALM SET" button (3) again to confirm settings. Display will no longer flash.
TO SEE ALARM TIME
Press "MODE" button (6) once and alarm time 1 will be shown as indicated by A1.
1.
Press "MODE" button (6) again and alarm time 2 will be shown as indicated by A2
2.
Press "MODE" button (6) again and the current time will be shown.
3.
TO SET ALARM TIME
Press "MODE" button (6) once and alarm time 1 will be shown as indicated by A1.
1.
Press and hold "ALM SET" button (3) for approximately 3 seconds until A1 flashes.
2.
Press "-/RCC" button (8) to change the hour setting.
3.
Press "ALM SET" button (3) again.
4.
Press "+/C/F" button (4) or "-/RCC" button (8) to change the minute setting.
5.
Press "ALM SET" button (3) again.
6.
When Alarm time 1 (A1) is shown, press "ALM SET" button (3) to turn ON and OFF the alarm.
7.
The symbol .
Press "Mode" button (6) again and alarm time 2 will be shown. To set alarm time A2, follow the
8.
above instructions. Press "Mode" button (6) again to see current time.
Wait until the clock is no longer attempting to synchronise or it is
will be shown when the alarm is on.
Contact your local weather bureau or authorities for more
4