Technoline WS 6730 Manual Del Usuario página 16

Indicating the outdoor
temp. is rising
(4) Outdoor Humidity Trend
The trend pointer (A13) displayed on the LCD indicates the trend of the outdoor

humidity.
Indicating the outdoor
humidity is rising
(5) Celsius / Fahrenheit
Press "°C /°F" button (B10) to select Indoor/Outdoor Temperature in Celsius

mode or Fahrenheit mode.
If the temperature is out of the measurable range, LL.L (beyond the minimum

temperature) or HH.H (beyond the maximum temperature) will be shown on the
LCD.
9. Time and Alarm Setting
9.1 Radio Controlled Clock:
At 2 minutes after the start-up of the unit, the clock automatically starts to scan

the DCF time signal. Radio Control Icon "
(A1) flashes，
Indicating now is receiving
DCF signal
The clock automatically scans the time signal at 3.00 a.m. every day to maintain

accurate time keeping. If reception fail, scanning stops ("
and repeats again at 4.00 am, 5am, and 6 am.
The clock can be set to scan the time signal manually by holding "

for 3 seconds. Each reception takes about several minutes. If reception fail,
scanning stops ("
Indicating the outdoor
temp. is steady
Indicating the outdoor
humidity is steady
(A1) turns on,
Indicating signal received
successfully
" disappear on the LCD) and repeats again on next full hour.
Indicating the outdoor
temp. is falling
Indicating the outdoor
humidity down
" (A1) flashes on LCD.
(A1) disappear,
Indicating signal reception
failed
" on LCD disappear)
" button (B5)
7