Peel Back Approx. 50Mm (2") Of Tape Liner From Each Of; The Tape Sections And Fold At 45; Weathershield; Do Not Touch Exposed Surface Of Tape - Mopar 82209506 Hoja De Instrucciones

STEP 9

Peel back approx. 50mm (2") of tape liner from EACH of

the tape sections and fold at 45

Weathershield.

DO NOT TOUCH EXPOSED SURFACE OF TAPE.

See FIGURE 9.

STEP 10
Position the front edge against the door frame (as shown
above). Double check positioning of Slimline Weather-
shield as per step 7, then apply light pressure to exposed
tape areas. See FIGURE 10.
STEP 11
Peel remaining tape liner by pulling on exposed ends of
liner, and apply firm pressure around attachment areas.
See FIGURE 11.
STEP 12
Using a clean, soft cloth rub down firmly around attach-
ment areas 4 times to ensure maximum adhesion.
See FIGURE 12.
o
to outside of Slimline
9
10
11
12
SL301
3/9
K6859637
82209506
0
45
Exposed
tape

Tape liner