Beko HNU51311SH Manual Del Usuario página 10

3 Using the appliance
• If the appliance breaks down or
gets damaged, shut down the fuse
or unplug the appliance and call
the authorised service agent.
• If the supply cable is damaged, it
must be replaced by the manufac-
turer, its service agent or similarly
A
qualified personnel to avoid any
danger.
• Shut down the fuse or unplug the
appliance in case of breakdown
of the lamps of the appliance.
Replace immediately the faulty
lamps in order to prevent other
lamps from being overloaded (wait
for the lamps to cool down first).
3.5 Operation with chimney
connection
•
Vapour is extracted through the
flue duct, which is fastened to
the connection head on the
hood.
• The diameter of the flue duct must be the same
as the connection ring. In horizontal settings, the
pipe has to have a slight upward slope (around
10º) so that the air can exit the room easily.
3.6 Operation without chimney
connection
• Air is filtered through the carbon
filter and recirculated in the
room. Carbon filter is used
when it is impossible to use a
flue in the house.
• In flueless use, remove the flaps inside the flue
adapter.
• Remove the aluminum grease filter. To install the
carbon filter, fit the filter to the tabs by centring
it on the plastic piece on both sides of the fan
body. tighten it by turning right or left.
10 / EN
• Replace aluminum grease filter.
Cooker Hood / User Manual