Symbols On The Product; Safety Definitions; Product Liability; Euro V Emissions - Husqvarna LC 151 Manual De Usuario

Symbols on the product

WARNING! Be careful and use the
product correctly. This product can cause
serious injury or death to the operator or
others.
Please read the operator's manual
carefully and make sure that you
understand the instructions before use.
Look out for thrown objects and ricochets.
Keep persons and animals at a safe
distance from the work area.
Warning: Keep hands and feet away from
the rotating blade.
Warning: Keep hands and feet away from
rotating parts.
Stop the engine and remove the ignition
cable before repairs or maintenance.
This product is in accordance with
applicable EC directives.
Noise emission to the environment
according to the European Community's
Directive. The product's emission is
specified in the Technical data chapter
and on the label.

Safety definitions

Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING:
injury or death for the operator or bystanders
if the instructions in the manual are not
obeyed.
1566 - 008 - 24.11.2021
Used if there is a risk of
Risk of fire.
Do not breathe in exhaust fumes. The
exhaust fumes from the engine contain
carbon monoxide, an odourless,
poisonous and very dangerous gas. Do
not start the engine indoors or in closed
spaces.
Hot surface.
Note:
Other symbols/decals on the product refer to
certification requirements for some commercial areas.

Product liability

As referred to in the product liability laws, we are not
liable for damages that our product causes if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not from
the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
• the product is not repaired at an approved service
center or by an approved authority.

Euro V Emissions

WARNING:
voids the EU type-approval of this product.

Safety

CAUTION:
damage to the product, other materials or
the adjacent area if the instructions in the
manual are not obeyed.
Note:
Used to give more information that is necessary
in a given situation.
Fill the engine with oil before
you start the product.
Tampering with the engine
Used if there is a risk of
3