To Adjust The Handle; To Set The Product In Operation Position; To Set The Product In Transport Position - Husqvarna LC 151 Manual De Usuario

3. Push the screw (F) thrugh the washer (G) and the
handle support bracket.
F
4. Tighten the knob (H) fully.

To adjust the handle

1. Loosen the lower knobs.
2. Move the knobs to the lower end of the grooves on
the left and the right side of the product.
3. Set the handle height in one of the 2 available
positions.
4. Move the knobs up in the direction of the handle until
they stop and you hear a click.
5. Tighten the knobs fully.

To set the product in transport position

1. Loosen the lower knobs.
1566 - 008 - 24.11.2021
G
H
2. Move the knobs to the lower end of the grooves on
the left and the right side of the product.
3. Fold the handle forward.

To set the product in operation position

1. Fold the handle to upright position.
7