Brandson Equipment 305472 Guia Del Usuario página 25

No.
1
2
3
4
5
6
7
8
5. Installation
Take the appliance out of the package and remove all the packaging material. Then
check the product for any damage. Place the heater on a flat surface. The heater
has to be placed at least 1 m away from other objects and should not be kept
directly under a socket.
Caution! Make sure that the appliance is not placed near flammable materials or
any liquids. The air outlet should also not point in this direction.
Note: To ensure that the heater works and heats properly, the desired temperature
must be set on the heater so that it is a couple of degrees higher than the room
temperature. If the heater does not start heating, increase the desired temperature
to activate the heating elements.
English
Description
Carrying handle
Housing
Heating elements
Nut to tilt the fan heater
Pedestal
Power setting controller
Power lamp
Temperature controller
25