Sunny SF-RW5940 Manual Del Usuario página 17

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-
907-8669).
STEP 5:
Attach the Sliding Rail (No. 2) to the
Main Frame (No. 1) using 1 Bolt (No.
38) and 1 Bolt (No. 37). Tighten and
secure with Wrench (No. 93) and
Wrench (No. 94).
Next, secure the Sliding Rail (No. 2) to
the Main Frame (No. 1) using 1 Knob
(No. 39) and 1 Washer (No. 40), then
insert Pull Pin (No. 36).
STEP 6:
Remove 6 Bolts (No. 51) from the
back of the Meter (No. 50) with the
Spanner (No. 95)
Attach the Tablet Holder (No. 99) to
the Meter (No. 50) and screw with 2
Bolts (No. 51) that were removed.
Tighten and secure with Spanner (No.
95).
Connect the Sensor Wire A (No. 43A)
to the Meter Wire B (No. 50B) and
connect the Sensor Wire B (No. 43B)
to the Meter Wire A (No. 50A). Then
insert them into the Meter Holder (No.
49).
Attach Meter (No. 50) to the Meter
Holder (No. 49) with 4 Bolts (No. 51)
that were removed. Tighten and
secure with Spanner (No. 95).
The assembly is complete!
16