Replacing The Ac Fuse - Dometic CFF12 Instrucciones De Uso

Operation
6.11

Replacing the AC fuse

D
DANGER! Electrocution hazard
Failure to obey this warning will result in death or serious injury.
Disconnect the power supply and the connection cable before you
replace the device fuse.
1. Disconnect the power supply to the device.
2. Remove the connection cable.
3. Pry out the fuse insert (fig. 4 2, page 4) with a screwdriver.
4. Replace the defective glass fuse with a new one that has the same type and rat-
ing (4 A, 250 V).
5. Press the fuse insert back into the housing.
6. Reconnect the power supply to the device.
6.12 Replacing the device DC fuse
1. Disconnect the power supply to the device.
2. Pry out the fuse cover (fig. 4 3, page 4) to access the fuse.
3. Reverse the fuse cover and use the hook to remove the fuse.
4. Replace the defective fuse with a new fuse of the same type (Automotive Stan-
dard blade fuse, 10 A).
5. Re-fit the fuse cover.
6. Reconnect the power supply to the device.
6.13 Replacing the DC plug fuse
➤ Replace the DC plug fuse as shown in fig. b, page 9.
6.14 Replacing the light PCB
A
NOTICE! Damage hazard
The lamp can only be replaced by the manufacturer, a service agent or
similarly qualified person to avoid hazard.
24
CFF12, CFF35, CFF45
EN