Dell PowerVault MD3600f Introducción Al Sistema página 6

Matrices de almacenamiento
Ocultar thumbs Ver también para PowerVault MD3600f:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Route the cable away from places where it can be damaged by other
devices in the rack cabinet.
Do not use plastic cable ties in place of the provided cable straps.
Do not over-tighten the cable straps or bend the cables to a diameter of
less than 76 mm (3") or a radius less than 38 mm (1.5").
Do not place excess weight on the cable at the connection point. Ensure
that the cable is well supported.
Guidelines for Using SFP Modules
The storage array requires SFP modules. SFP modules convert electrical
signals to optical signals that are required for FC transmission to and from
RAID controller modules. After installing the SFP modules, fiber optic cables
are used to connect the storage array to other FC devices. Before installing
SFP modules and fiber optic cables, read the following information:
Use only Dell supported SFPs with the PowerVault MD3600f series storage
arrays. Other generic SFPs are not supported and may not work with the
storage arrays.
The SFP module housing has an integral guide key that is designed to
prevent you from inserting the SFP module incorrectly.
Use minimal pressure when inserting an SFP module into a FC port.
Forcing the SFP module into a port may damage the SFP module or the
port.
You can install or remove the SFP module while the port is powered on.
You must install the SFP module into a port before you connect the fiber
optic cable.
You must remove the fiber optic cable from the SFP module before you
remove the SFP module from the port.
CAUTION:
When handling static-sensitive devices, take precautions to avoid
damaging the product from static electricity.
4
Getting Started With Your System
All manuals and user guides at all-guides.com

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Md3620f

Tabla de contenido