ATI BD2205 Manual De Instrucciones página 6

INSTRUCTIONS FOR THE USER
10. SETTING THE WATER TEMPERATURE
A thermostat is fitted on the electrical resistance: it cuts off the power supply when the pre-set temperature is reached.
Temperature setting (T - FIG_09-1): it is possible to adjust the hot water temperature between 0 ° C and 60 ° C, according to
the user's needs. The thermostat adjusts the water temperature only on the electrical element function.
WARNING: BEFORE WORKING ON THE THERMOSTAT, MAKE SURE THE POWER SUPPLY IS
DISCONNECTED COMPLETELY
11. ACCESSORIES AVAILABLE ON REQUEST
ABMIX (FIG_11-1): It allows you to set a constant hot water temperature (between 21 ° C and 70 ° C)
ABRGOM (FIG_11-2): It allows making hydraulic connections by means of rubber tubes, instead of threaded connections.
12. MAIN PARTS (FIG_12-1)
POS.
01 0-0410
03 020-0060
04 100-0086
05 130-0081
06 130-0092
07 140-0001
08 280-0014
08 280-0015
08 280-0016
08 280-0037
08 280-0039
08 280-0034
09 280-0042
10 900-0135
11 900-0613
13. OVER HEAT INTERVENTION
The electrical resistance is equipped with a thermostat, which has also a safety function: it cuts off the power supply to the
resistance in the event of excessive water temperature.
In the event of such a condition, you need a manual intervention (manual reset) to start again the device.
CAUTION: THE NEED TO PERFORM THE MANUAL RESET OPERATION INDICATES A POSSIBLE
SITUATION OF DANGER. DO NOT MAKE THE RESET OPERATION BEFORE THE UNIT IS INSPECTED
BY AN AFTER-SALE SERVICE OR BY AN AUTHORIZED SKILLED PERSON
For manual reset operation proceed as follows:
a) disconnect the power supply
b) remove the electrical resistance cover (FIG_13-1)
c) press the reset button placed on the thermostat (R - FIG_9-1)
d) mount of the electrical resistance cover (FIG_13-1)
e) restore the power supply
COD.
mounting bracket
electrical resistance cap
gasket
1/2 x 14 Straight male connection
Pressure relief and non-return valve
gland
230 V - 550 W electrical resistance
230 V - 850 W electrical resistance
230 V - 1250 W electrical resistance
120 V - 500 W electrical resistance
120 V - 800 W electrical resistance
120 V - 1200 W electrical resistance
Thermostat
power cable
Insulated boiler
DESCRIPTION
ENGLISH
2 2 2 2 2 2
1 1 1 1 1 1
1 1 1 1 1 1
4 4 4 4 4 4
1 1 1 1 1 1
1 1 1 1 1 1
1
1
1
1
1
1
1 1 1 1 1 1
1 1 1 1 1 1
1 1 1 1 1 1
p. 4/5