On/Off Switch - STERWINS 40VHT2-60.1 Manual Del Usuario

FR 4. ASSEMBLY
ES
PT
IT
4.1 UNBOXING
EL
PL
7
RU
4
KZ
UA
RO
• WEAR GLOVES WHEN UNBOXING.
• DO NOT USE CUTTER, KNIFE, SAW OR ANY OTHER SIMILAR TOOL FOR
UNBOXING.
EN
4.2 INSTALLATION
Blade cover : illustration 2.1
Remove the blade cover 8 from the blade 2 before operation. Align and push the blade cover 8
onto the blade 2 to attach it.
NOTE: Always attach the blade cover 8 when the product is not in use, for storage and
transportation.
Installing/Removing the battery pack : illustration 2.2
WARNING : Make sure the latch on the bottom of the battery pack snaps in place and the
battery pack is fully seated and secure in the product's battery docking port before beginning
operation.
Failure to securely seat the battery pack could cause the battery pack to fall out, resulting in
serious personal injury.
WARNING! THE PRODUCT MUST BE FULLY ASSEMBLED BEFORE
OPERATION! DO NOT USE A PRODUCT THAT IS ONLY PARTLY
ASSEMBLED OR ASSEMBLED WITH DAMAGED PARTS! FOLLOW
THE ASSEMBLY INSTRUCTIONS STEP-BY-STEP AND USE THE
PICTURES PROVIDED AS A VISUAL GUIDE TO EASILY ASSEMBLE
THE PRODUCT !
6 9
5
8
3
2
1
• CARRY THE TOOL ONLY BY THE REAR HANDLE (6).
• KEEP THE BOX FOR FURTHER REUSE (TRANSPORT AND STORAGE).
• KEEP INSTRUCTION MANUAL IN A DRY AREA FOR FURTHER CONSULTATION.
220
1. Cutting bar
2. Blade
3. Protection guard
4. Safety switch
5. Front handle
6. Rear handle

7. On/off switch

8. Blade cover
9. Unlock button