Function Operation - ausdom ANC10 Manual Del Usuario

9. Control Instructions
Function
Power on
Power off
Pairing
Increase Increase
volume volume
Increase
Decrease
volume
volume
Decrease
Play media
volume
Pause/restart
Play music/video
media playback
Pause/restart
Skip to next
music/video
track
Skip to next
Skip to previous
track
track
Skip to previous
track Answer a call
Answer a call
End a call
Noise Canceling
End a call
On
Noise Cancelling
Noise Canceling
On
Off
Noise Cancelling
Offf
Note:
-There will be an alert tone when the volume reaches the
maximum level.
Operation
When the headphone is off, press and hold the power
button for 3 seconds, and you will see the blue light
flash and hear "power on".
When the headphone is on, press and hold the power
button for 3 seconds, and you will hear "power off".
Press and hold the power button for about 5 seconds til
Press the Volume Up V+ button
the red and blue light flash alternatively, and you will
When the headphone is on, press and hold the power button
hear "paring".
3 seconds, and the LED flashes red and sounds a prompt..
Press the Volume Down V- button
Press the Volume Up V+ button
Press the power button
Press the Volume Down V- button
Press the power button
Press the power button
Press and hold the V+ button for 1-2s
Press the power button
Press and hold the V+ button for 1-2s
Press and hold the V- button for 1-2s
Press and hold the V- button for 1-2s
Press the power button to answer the call.
When a call rings, press the power button
Press the power button
Press the Noise-Canceling Button to ON, Blue LED
To end the call, press the power button.
light on.
Press the Noise-Canceling Button to OFF, Blue LED
Press the ANC button, the green light on.
light off
Press the ANC button, the green light off.
EN-7