Diffusers - Cameo H2 FC Manual De Usuario

Temperature = Displays temperature of
LED unit
Operation Hours = Displays operating time
MANUAL LOCKING FUNCTION
In addition to the ability to automatically protect the spotlight from accidental and unauthorised operation (see „Settings" –
„Auto Lock"), the controls can also be locked manually. Press and hold the UP and DOWN controls simultaneously for approximately 5
seconds. „LOCKED" is now displayed and it is no longer possible to change the spotlight's settings via the controls. After approx. eight mi-
nutes, the current operating mode is displayed again. To unlock, press and hold the UP and DOWN controls simultaneously for approximately
5 seconds. The display will show the previously displayed information.

DIFFUSERS

Three diffusers (diffuser with medium beam angle already installed) are provided with the spotlight. The other two diffusers have a beam
angle of 21° and 64°. Loosen the four cross-head screws
remove the retaining ring from the spotlight. Use a small flat-bladed screwdriver to remove the diffuser from the retaining ring. Insert the
required diffuser in the retaining ring and then secure the ring to the spotlight with the previously loosened screws.
A
LED xxx°C / xxx°F
C/F Unit Celsius (= display in degrees Celsius)
Unit Fahrenheit (= display in degrees Fahrenheit)
Operation Hours Displays total operating time in hours and minutes
xxxx:xxh
A
on the retaining ring on the front of the spotlight with a suitable tool and
A
A
A
13