Samsung 6 Serie Manual Del Usuario página 15

Black Tone (Off / Dark / Darker / Darkest)
■
black level to adjust the screen depth.
Dynamic Contrast (Off / low / Medium / high)
■
Adjust the screen contrast.
shadow Detail : Increase the brightness of dark images.
■
✎
Disabled under PC mode.
gamma : Adjust the primary color intensity.
■
Expert Pattern(Off / Pattern 1 / Pattern 2)
■
running the Expert Pattern function, the picture can be
calibrated without a generator or filter. If the OSD menu
disappears or a menu other than the Picture menu is
opened, the calibration is saved and the Expert Pattern
window disappears.
✎
While the Expert Pattern is running, sound is not
output.
✎
Only enabled on DTV / Component / HDMI.
RgB Only Mode (Off / Red / green / Blue)
■
Displays the Red, Green and Blue color for making fine
adjustments to the hue and saturation.
Color space (Auto / native / Custom)
■
range of colors available to create the image.
White Balance : Adjust the color temperature for a more
■
natural picture.
R-Offset / g-Offset / B-Offset: Adjust each color's
(red, green, blue) darkness.
R-gain / g-gain / B-gain : Adjust each color's (red,
green, blue) brightness.
Reset: Resets the White Balance to it's default
settings.
10p White Balance (Off / On)
■
balance in 10 point interval by adjusting the red, green,
and blue brightness.
✎
Available when the picture mode is set to
and when the external input is set to HDMI or
Component.
✎
Some external devices may not support this
function.
Interval: Select interval to adjust.
Red: Adjust the red level.
green: Adjust the green level.
Blue: Adjust the blue level.
Reset: Resets the 10p White Balance to its default
settings.
Flesh Tone : Emphasize pink "flesh tone".
■
Edge Enhancement (Off / On)
■
boundaries.
: Setting the xvYCC mode to on
xvYCC (Off / On)
■
increases detail and Color space when watching
movies from an external device (e.g. DVD player)
connected to the HDMI or Component IN jacks.
✎
Available when the picture mode is set to
and when the external input is set to HDMI or
Component.
✎
Some external devices may not support this
function.
: Select the
:
: By
POWER
P
:
: Adjust the
SLEEP
: Controls the white
Movie
FAV.CH
S.MODE
: Emphasize object
Movie
Picture Options
O
m → Picture → Picture Options →
MEnU
EnTERE
✎
In PC mode, you can only make changes to the
Tone, size and Auto Protection Time.
Picture Options
Color Tone
Size
Digital Noise Filter
MPEG Noise Filter
HDMI Black Level
Film Mode
INFO
Auto Motion Plus
▼
U Move E Enter R Return
Color Tone (Cool / normal / Warm1 / Warm2)
■
✎
Warm1 or Warm2 will be deactivated when the
picture mode is Dynamic.
✎
Settings can be adjusted and stored for each
external device connected to an input on the TV.
: Your cable box/satellite receiver
size
■
P.MODE
may have its own set of screen sizes as
well. However, we highly recommend
you use 16:9 mode most of the time.
16:9: Sets the picture to 16:9 wide
mode.
Wide Zoom: Magnifies the picture size more than 4:3.
✎
Adjusts the Position by using
Zoom: Magnifies the 16:9 wide pictures vertically to fit
I-II
the screen size.
DUAL
✎
Adjusts the Position or Size by using
4:3: Sets the picture to basic (4:3) mode.
✎
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and center
of the screen may cause image retention (screen
burn) which are not covered by the warranty.
TOOLS
screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are input.
✎
nOTE
x
After selecting Wide Zoom or Zoom:
1. Press the ► button to select Position.
2. Press the EnTERE button.
3. Press the ▲ or ▼ button to move the picture up
or down.
4. Press the EnTERE button.
5. Press the ► button to select Reset.
6. Press the EnTERE button.
Color
: Normal ►
: 16:9
: Auto
: Auto
: Normal
: Off
: Off
CHLIST
P.SIZE
▲, ▼ buttons.
▲, ▼ button.
MEDIA.P
15
English