Samsung 6 Serie Manual Del Usuario página 23

Ocultar thumbs Ver también para 6 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

network setup (Auto)
Use the Automatic network setup when connecting your TV
to a network that supports DHCP. To set up your TV's cable
network connection automatically, follow these steps:
how to set up automatically
1. Connect your TV to your LAN as described in the
previous section.
2. Turn on your TV, press the
remote, use the ▲or▼ button to select setup, and then
press the EnTERE button.
3. Use the ▲or▼ button to select Network in the setup
menu, and then press the EnTERE button. The
Network screen appears.
Network
Network Type
Network Setup
Network test
SWL (Samsung Wireless Link)
SWL Connect
U Move E Enter R Return
4. On the network screen, select network Type.
5. Set network Type to Wired.
6. Select network setup. The network setup screen
appears.
Network Setup
Internet Protocol Setup
IP Address
Subnet Mask
Gateway
DNS
DNS Server
U Move E Enter R Return
7. Set Internet Protocol setup to Auto.
8. Auto acquires and enters the needed Internet values
automatically.
9. Wait two minutes, and then press the
on your remote.
10. If the network Function has not acquired the network
connection values, go to the directions for Manual.
MEnU
button on your
: Wired
: Off
: Auto
:
:
:
:
Auto
:
RETURn
button
network setup (Manual)
Use the Manual network setup when connecting your TV to
a network that requires a Static IP address.
getting the network Connection Values
To get the Network connection values on most Windows
computers, follow these steps:
1. Right click the Network icon on the bottom right of the
screen.
2. In the pop-up menu that appears, click Status.
3. On the dialog that appears, click the Support tab.
4. On the Support Tab, click the Details button. The
Network connection values are displayed.
how to set up manually
To set up your TV's cable network connection manually,
follow these steps:
1. Follow Steps 1 through 6 in the "How to set up
automatically" procedure.
2. Set Internet Protocol setup to Manual.
3. Press the ▼ button on your remote to go to the first
entry field.
4. Enter the IP Address, subnet Mask, gateway, and
Dns server values. Use the number buttons on your
remote to enter numbers and the arrow buttons to move
from one entry field to another.
5. When done, press the
RETURn
6. Select network Test to check the Internet connectivity.
button on your remote.
23
English

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

650

Tabla de contenido