Additional Setting; Setup Menu; Setting The Time; Using The Sleep Timer - Samsung 6 Serie Manual Del Usuario

Basic Features

Additional setting

(digital channels only)
DTV Audio level (MPEg / hE-AAC)
■
allows you to reduce the disparity of a voice signal
(which is one of the signals received during a digital TV
broadcast) to a desired level.
✎
According to the type of broadcast signal,
hE-AAC can be adjusted between -10dB and 0dB
✎
To increase or decrease the volume, adjust
between the range 0 and -10 respectively.
: SPDIF (Sony Philips Digital InterFace)
sPDIF Output
■
is used to provide digital sound, reducing interference
going to speakers and various digital devices such as a
DVD player.
Audio Format: During the reception of a digital TV
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.
✎
By connecting to 5.1ch speakers in a Dolby
Digital setup, maximize your interactive 3D sound
experience.
Audio Delay: Correct audio-video mismatch, when
watching TV or video, and listening to digital audio
output using an external device such as an AV receiver.
Dolby Digital Comp (line / RF)
■
signal disparity between a dolby digital signal and a
voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound).
✎
Select line to obtain dynamic sound, and RF
to reduce the difference between loud and soft
sounds at night time.
line: Set the output level for signals greater or less than
-31dB (reference) to either -20dB or -31dB.
RF: Set the output level for signals greater or less than
-20dB (reference) to either -10dB or -20dB.
sound Reset (OK / Cancel)
Reset all sound settings to the factory defaults.

Setup Menu

setting the Time

¦
O
m → setup → Time → EnTERE
MEnU
Time
Clock : Setting the clock is for using various timer
■
features of the TV.
O
The current time will appear every time you press
the InFO button.
✎
If you disconnect the power cord, you have to set
the clock again.
18
English
: This function
MPEg /
: This function minimizes
Clock Mode (Auto / Manual)
✎
Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually.
✎
The antenna must be connected in order to set
the time automatically.
Clock set: Set the Day, Month, Year, hour, Minute
and am/pm manually.
✎
Available only when
Manual.

Using the sleep Timer

¦
O
m → setup → Time → sleep Timer →
MEnU
EnTERE
t
sleep Timer
■
after a preset period of time. (30, 60, 90, 120, 150 and
180 minutes).
✎
To cancel the Sleep Timer, select Off.

setting the On/Off Time

¦
O
m → setup → Time → Timer 1 →
MEnU
EnTERE
Timer 1 / Timer 2 / Timer 3
■
timer settings can be made. You must set the clock first.
On Time
▲
Inactivate 12
▼
Off Time
Inactivate 12
Volume Source
10 TV
Repeat
Sun
Once
L Move U Adjust E Enter R Return
On Time / Off Time: Set the hour, minute, am/pm
and activate / inactivate. (To activate the timer with the
setting you have chosen, set to Activate.)
Volume: Set the desired volume level.
source: Select the TV or UsB device content to be
played when the TV turns on automatically. Select TV or
UsB. (USB can be selected only when a USB device is
connected to the TV.)
Antenna (when source is set to TV): Select Air or Cable.
Channel (when the source is set to TV): Select the
desired channel.
Contents (when the source is set to UsB): Select a
folder in the USB device containing music or photo files
to be played when the TV is turned on automatically.
Clock Mode is set to
: Automatically shuts off the TV
: Three different on / off
Timer 1
00 am
00 am
Antenna Channel
Air 0
Mon Tue Wed Thu Fri Sat