Connecting Wireless Network - Samsung 6 Serie Manual Del Usuario

Ocultar thumbs Ver también para 6 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Advanced Features

Connecting Wireless network

¦
To connect your TV to your network wireless, you need a wireless router or modem and a Samsung Wireless LAN Adapter (WIS09ABGN,
WIS09ABGN2, WIS10ABGN), which you connect to your TV's back or side panel USB jack. See the illustration below.
To use the
sWl (samsung Wireless link) function, connect to the
The LAN Port on
the Wall
Samsung's Wireless LAN adapter is sold separately and is offered by select retailers, Ecommerce sites and Samsungparts.
com. Samsung's Wireless LAN adapter supports the IEEE 802.11A/B/G and N communication protocols. Samsung
recommends using IEEE 802.11N. When you play video over a IEEE 802.11B/G connection, the video may not play smoothly.
nOTE
x
You must use the "Samsung Wireless LAN Adapter" (WIS09ABGN, WIS09ABGN2, WIS10ABGN) to use a wireless network.
x
Samsung Wireless LAN Adapter and The USB extension Cable are sold separately and are offered by select retailers,
Ecommerce sites and Samsungparts.com.
x
To use a wireless network, your TV must be connected to a wireless IP sharer. If the wireless IP sharer supports
DHCP, your TV can use a DHCP or static IP address to connect to the wireless network.
x
Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer
is currently being used by another device nearby, this will result in interference and communication failure.
x
If you apply a security system other than the systems listed blow, it will not work with the TV.
x
If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or
TKIPAES (WPS2Mixed) for your AP, Samsung TVs will not support a connection in compliance with new Wi-Fi
certification specifications.
x
If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button Configuration) or
PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in either mode.
x
Keep the Samsung Wireless LAN Adapter at a distance from the TV. If you watch the TV with the adapter connected
nearby, images may appear corrupted for some channels.
x
If your router, modem, or device is not, it may not connect to the TV via the "Samsung Wireless LAN Adapter."
x
Connection Methods
Samsung Auto Configuration
PBC (WPs)
Auto Setup (Using the Auto Network Search function)
Manual Setup
sWl (samsung Wireless link)
Ad-hoc
x
All of Samsung Wireless LAN Adapter shoud be connected directly to the TV's USB port. USB HUB are not supported.
notice
The picture may appear corrupted or have static for some
channels when the TV is connected to the Samsung Wireless
LAN Adapter.
Connect via an extension cable
24
English
Wireless IP sharer
(AP having DHCP Server)
LAN Cable
: You can setup the wireless network connection on six ways.
UsB 1 (hDD)
port.
Samsung Wireless
LAN Adapter
Method
or
TV Side Panel
or

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

650

Tabla de contenido