4. ELECTRICAL CONNECTIONS
* This refrigerator/freezer must be plugged into the
separated power receptacle which is readily
accessible and has enough capacity. The maximum
allowable voltage variation should not exceed ± 10
percent of the nameplate rating. See the Nameplate.
* Two types of Power Cords, UK and Continental, are
provided as accessories. Choose the one suitable
for the receptacle used. Connect the Power Cord to
the connector at the upper rear of the unit, and secure
the bracket with screws. This should only be done
by a qualified service engineer to avoid any danger.
5. FINAL CHECK LIST
1) Is the refrigerator/freezer in a site where the ambient
temperature is within 5°C to 43°C all year around?
2) Have all shipping carton, packing, tape(s) and
protective plastic film on the exterior been removed
from the refrigerator/freezer?
3) Have all electrical connections been made?
4) Has the power supply voltage been tested or
checked against the nameplate rating?
5) Has the user been given the Instruction Manual and
instructed on how to operate the refrigerator/freezer
and the importance of periodic maintenance
recommended?
6) Has the user been given the name and telephone
number of the Authorized Service Agency?
All manuals and user guides at all-guides.com
3
ENGLISH