Disassembly - NUTRIBULLET Juicer Manual De Instrucciones

Disassembly

1
Ensure the unit is powered
down, turned "OFF", and
unplugged.
3
Locking Handle
Unlock the
Basin Cover
from the by
pulling the handle backward
out of the "ears" on either side
of the Basin Cover. Move the
handle down.
18
2
Remove the pitcher from
under the spout. To prevent
drips use the No-Drip Spout
cover to close the juice spout.
4
Remove the Pulp Basin from
the Motor Base by pulling
Basin Cover
upwards with the
Sieve
and still in place, and
take it directly to your sink.
5
Remove the Food Pusher by
lifting it out of the feed chute.
7
Gently lift the Sieve vertically
out of the center of the Pulp
Basin. Clean the Sieve right
away (see care instructions).
6
Lift the Basin Cover vertically
o of the Pulp Basin and
remove any pulp from the
inside of the cover. You
may use the fl at end of the
Cleaning Brush to scrape
pulp o of the cover.
8
Empty the Pulp Basin. Use
the fl at end of the Cleaning
Brush to easily scrape out the
pulp and set it aside for use in
other recipes or composting.
You can also empty the
pulp into your waste bin or
compost.
19