Costway SP37558 Manual Del Usuario página 2

STEP 1. Open the Cap (B) on the Base (A). Fill
the Base (A) with water or sand, and then close
the Cap (B). As shown in FIGURE A and
FIGURE B.
STEP 2. Remove the Cover (C) first. Then fix the
Spring (E) to the top of the Base (A) with four
Screws (F). Replace the Cover (C) on the top of
the Spring (E). As shown in OVERVIEW
CHART.
STEP 3. Slide the Foam (D) to the top of the
Inner Adjustable Tube (I) first, and then install the
Inner Adjustable Tube (I) into the Lower Tube (B)
with the Knob (H) to adjust the height with the
Knob (H). As shown in OVERVIEW CHART.
STEP 4. Slide the Punching Ball (L) to the Inner
Adjustable Tube (I) from the top and tighten with
Screws (J) and Nuts (K). As shown in
OVERVIEW CHART.
※ Do not use the Boxing stand when any other
item is on your hands (eg. Ring).
FIGURE
FIGURE
02