VDO ContiSys OBD Manual Del Usuario página 8

Quick Reference Guide
ContiSys OBD Service Tool
Introduction
The functions listed in the main menu are
dependent on the software version
loaded on the tool. For further details on
available functions, please visit
www.vdo.com/products_solutions/
cars/conti-sys
refer to the Operating Instructions on the
enclosed CD-ROM or contact Product
Support.
Connection
Connection to the specific system is via
either the vehicle's EOBD (J1962)
diagnostic socket or by a system specific
connector. Refer to the 'Vehicle
Application List' on the enclosed CD
ROM to determine the correct cable.
F G
E
D
C
B
A
CON0017s
If using the EOBD (J1962) pin-switchable
cable (A2C59512072), ensure the
settings on the switch box correspond to
the settings listed for the vehicle and
system being tested.
WARNING: Incorrect settings on the
switch box may cause irreparable
damage to the vehicle's electrical
system.
Connect the appropriate cable between
the service tool and the vehicle's
diagnostic connector. Once connected,
the current software version number is
8
All manuals and user guides at all-guides.com
7
6
H 5 8
4
I 9
3
J 10
2 11
K
1
L 12
displayed before displaying the main
menu.
Use the and keys to select the
required menu function. Press
confirm the selection and then follow the
on-screen instructions.
If there is a connection problem, the
'Please Wait' screen will be replaced with
help screens.
Refer to the 'Operating Instructions' and
'Vehicle Applications List' on the
enclosed CD ROM for more detail.
Note: The latest version of the vehicle
application list can be downloaded from
http://www.vdo.com/downloads/
downloads.htm
to