ARTEVINO OXG1T230NPD/NPG Modo De Empleo página 25

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 50
8
7
13
12
11
7
Unscrew the two screws and the door
catch.
Unscrew the two screws on the
opposite side and remove the two
washers.
8
Mount the door catch on the desired
opening side, using screws.
Replace the washers, then the screws,
on the side opposite the door catch.
9
Turn the door through 180°.
Warning: the door is very
heavy.
Take any necessary
precautions to ensure that you
do not injure yourself or drop it.
10
Put the door back on its pin.
11
Put in place the upper hinge.
12
Screw the hinge so that the door is
completely parallel to the cabinet.
Check that the door seal adheres well
to the cabinet (by closing the door),
to ensure that it is completely air-tight.
13
Put in place the caps.
GB
9

Publicidad

Tabla de contenido
loading

Tabla de contenido