At Antec, we continually refine and improve our products to ensure the highest
quality. So it's possible that the new case may differ slightly from the descriptions
in this manual. This isn't a problem; it's simply an improvement. As of the date of
publication, all features, descriptions, and illustrations in this manual are correct.
Disclaimer
This manual is intended only as a guide for Antec's Computer Enclosures.
For more comprehensive instructions on installing the motherboard and peripherals,
please refer to the user's manuals which come with the components and drives.
New Solution Series User's Manual
NSK 3400
Quiet Micro ATX Case
The Power Supply
NSK 3400 comes with a 380 Watt universal input, active PFC, single 80mm fan
cooled power supply which meets the ATX 12V v2.01 specification. It is a high
efficiency power supply that delivers cleaner and environmentally friendlier power
to the system. This includes dual 12V output rails that deliver safer and more
reliable output to the system's components, as well as higher energy efficiency
which reduces power consumption by up to 25%, saving you money on your
electricity bill. In addition we've included a variety of industrial-grade protective
circuitry: OPP (over power protection), OVP (over voltage protection), UVP (under
voltage protection), and SCP (short circuit protection).
This power supply is backwards compatible with previous ATX 12V form factor
power supplies. To make sure you connect the power supply properly, please refer
to the user manuals supplied with the motherboard and peripherals before connect-
ing any of them to the power supply.
The power supply comes with a main power switch. Make sure to turn the switch
to the ON ( I ) position before you boot up the computer for the first time.
Normally, you won't need to switch to the OFF (O) position, since the power
supply includes a soft on/off feature. This lets you turn the computer on and off
by using the soft switch on the computer case. If the computer crashes and you
can't shut it down using the soft switch, you can switch the main power to the
OFF (O) position, to clear the fault, then reboot.
This power supply features Power Factor Correction (PFC) circuitry in accordance
with European standard regulation code EN61000-3-2. By altering the input
current wave shape, PFC improves the power factor of the power supply. This
results in increased energy efficiency, reduced heat loss, prolonged life for power
distribution and consumption equipment, and improved output voltage stability.
Together with the high efficiency design and the quiet 80mm fan, the power
supply delivers not only a cleaner but also a quieter operating environment.
All manuals and user guides at all-guides.com
1