Accessing Updated Golf Course Data; Warranty Information; Fcc Statement - Bushnell 362130 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17

ACCESSING UPDATED GOLF COURSE DATA

Your Ion Edge is pre-loaded with data for over 38,000 courses located worldwide. It is ready to use right out of the box, with no need to
download software or pay any membership fees.
To Update a single course file. Connect the Device to the Bushnell Golf Mobile via Bluetooth. Select Ion Edge from your device List. Select
Course Update. Follow the instructions on the Bushnell Golf Mobile App to search for your course and update your device.
To Update multiple courses. Please visit the Bushnell Golf Update Manager at https://appsupport.bushnellgolf.com in Google Chrome and
follow the instructions.
Your Bushnell
Ion Edge is warranted to be free of defects in materials and workmanship for one year after the date of purchase. In
®
the event of a defect under this warranty, we will, at our option, repair or replace the product, provided that you return the product
postage prepaid. This warranty does not cover damages caused by misuse, improper handling, installation, or maintenance
provided by someone other than a Bushnell Authorized Service Department.
Go to https://www.bushnellgolf.com/contact and fill out the contact form for any questions or warranty information.
This warranty gives you specific legal rights. You may have other rights which vary from country to country.
©2021 Bushnell Outdoor Products

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Shielded interface cable must be used with the equipment in order to comply with the limits for a digital device
pursuant to Subpart B of Part 15 of FCC Rules. Specifications and designs are subject to change without any notice
or obligation on the part of the manufacturer.
This equipment contains electric and/or electronic parts and must therefore not be disposed of as normal household waste. Instead,
it should be disposed at the respective collection points for recycling provided by the communities. For you, this is free of charge.
If the equipment contains exchangeable (rechargeable) batteries, these too must be removed before and, if necessary, in turn be
disposed of according to the relevant regulations (see also the respective comments in this unit's instructions).
Further information about the subject is available at your community administration, your local waste collection company, or in the
store where you purchased this equipment.
ONE YEAR LIMITED WARRANTY
Customer Service: (800) 423-3537
Disposal of Electric and Electronic Equipment
(Applicable in the EU and other European countries with separate collection systems)
www.bushnellgolf.com
Industry Canada Statement :
This device complies with ISED's license-exempt RSSs. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d' ISED applicables aux appareils radio exempts de licence. L' e xploitation
est autorisée aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable,
et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un
fonctionnement indésirable.
Radiation Exposure Statement / Déclaration d'exposition aux radiations :
This device complies with the Industry Canada portable RF exposure limit set forth for an uncontrolled environment
and is safe for the intended operation as described in this manual. Further RF exposure reduction can be achieved
if the product can be kept as far as possible from the user's body or if the device is set to a lower output power if
such function is available.
Le produit est conforme aux limites d' e xposition pour les appareils portables RF pour les Etats-Unis et le Canada
établies pour un environnement non contrôlé.
Le produit est sûr pour un fonctionnement tel que décrit dans ce manuel. La réduction aux expositions RF peut être
augmentée si l'appareil peut être conservé aussi loin que possible du corps de l'utilisateur ou que le dispositif est
réglé sur la puissance de sortie la plus faible si une telle fonction est disponible.
Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
Mac and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries.
Other names may be trademarks of their respective owners.
FCC ID: 2ASQI-36213
IC: 24886-36213
9

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

362131

Tabla de contenido