Tronic Qi TPBQ 10000 A1 Instrucciones De Utilización Y De Seguridad página 25

The power bank
button is pressed or when a device is connected,
even though the battery is charged.
The power consumption of the connected devices is too
high. Therefore, the internal overcurrent protection device
was activated.
Reduce the number of devices connected and press the
On/off button 3
Wireless charging did not start
Device to be charged is not placed at the centre of the Qi
charging surface
Make sure your device to be charged is at the correct
position at the centre of the Qi charging surface
power bank .
1
Make sure that there are no other objects on the Qi
charging surface
Remove your device's protective case as it may be blocking
the wireless signal.
Wireless charging speed slow
Device to be charged is too far away from the centre of the
Qi charging surface
Make sure your device to be charged is at the correct
position at the centre of the Qi charging surface
power bank 1 .
does not react when the
1
.
of the power bank
2
.
2
2 .
.
1
of the
2
2 of the
US-EN 25