Warranty; Declaration Of Conformity - Protool CHP 45 MAX Manual Original

13 Warranty

For our tools, we give warranty for material
and production defects in accordance with
the locally applicable legal provisions, but
in any case for at least 12 months. Within
the EU member states, the warranty period
is 24 months (verifi cation through invoice
or delivery note).
Damage caused by, in particular, natural
wear, overloading, incorrect handling, or
damage caused by the operator, or dam-
age caused through use of the equipment
contrary that specifi ed in the Operating In-
structions, or damage which was known at
the time of purchase, is not covered by the
warranty. Furthermore, damage caused by
the use of non-original PROTOOL accesso-
ries and consumable material (e.g. sanding
pads) is also excluded.
Complaints can only be recognised if the tool
is returned while still assembled to the sup-
plier or an authorised PROTOOL Customer
Service workshop. Keep the Operating In-
structions, Safety Instructions, Spare Parts
List and purchase receipt in a safe place.
Otherwise the respective, current warranty
condi tions of the manufacturer shall apply.
Note
Due to continuous research and develop-
ment work, we reserve the right to make
changes to the technical content of this
documentation.
16
14 Declaration of
Conformity
Rotary/chiseling hammer
CHP 45 MAX
We declare under our sole responsibility
that this product is in conformity with the
following standards or standardization doc-
uments:
EN 55 014-1, EN 55 014-2, EN 60 745-1,
EN 60 745-2-6, EN 61 000-3-2, EN 61 000-3-3
according to the provision of the regula-
tions stipulated in Directive 2006/42/EC,
2004/108/EC.
09
Stanislav Jakeš
Research and development
Protool GmbH
Wertstr. 20
D-73240 Wendlingen
31. 12. 2009
Serial no.
763708,
763709