Sony TMR-BT10A Manual De Instrucciones página 14

• If two or more devices are paired
with this unit, this unit tries to
connect with either of the last
two devices recognized before.
• Bluetooth connection of this unit
is established with A2DP
(Advanced Audio Distribution
Profile)*.
• For details on how to operate the
Bluetooth receiving device, refer
to the operating instructions
supplied with the device.
* For details on profiles, see page 4.
4
Start playing on the
stereo audio source
device connected to this
unit.
Notes
• If sound is distorted, turn down
the volume of the connected
device.
• If volume is low or noise occurs,
turn up the volume of the
connected device.
• Turn off the bass boost function
or equalizer function. If these
functions are on, sound may be
distorted.
Tips
• Turn up the volume of the stereo
audio source device as high as
possible to the extent that sound
is not distorted, then adjust the
volume on the Bluetooth
receiving device to a moderate
level.
• If this unit is in your bag, the
Bluetooth connection may
decline. Clip this unit on the bag.
14
US
Notes
• Even if the Bluetooth receiving device
supports AVRCP (Audio Video Remote
Control Profile), this unit cannot
perform playback control functions.
• In the following cases, you need to
make the Bluetooth connection again.
– The power of this unit does not turn
on.
– The power of the Bluetooth stereo
audio receiving device does not turn
on, or the Bluetooth function is off.
– The Bluetooth function of this unit or
the Bluetooth stereo audio receiving
device is in sleep mode.
– The Bluetooth connection is not
made.
To stop use
1
Turn off the Bluetooth
receiving device.
2
Press and hold the
POWER button on this
unit for about 3
seconds.
The indicator (blue) and
indicator (red) light up
together, and the unit turns off.
Tip
When you finish playing music, the
Bluetooth connection may terminate
automatically, depending on the
Bluetooth device.