Technical Information; Technical Data; Key To Symbols; Transport / Storage / Disposal - Ardo CALYPSO PRO Instrucciones De Uso

9. Technical Information

9.1 Technical data

Pump dimensions
Power adapter dimensions
Pump weight
Power adapter weight
Double insulated protection class
Protection level
Life time (excluding normal wear
and tear)
9.2 Compliance
In accordance with Medical Devices Directive MDD 93/42 EEC, EN 60601-1, EN 60601-1-2,
EN ISO 10079-1, EN 60601-1-6, EN60601-1-11, 2011/65/EU (RoHS), UL1431, ANSI/AAMI
ES60601-1:2005, CSA C22.2 No. 68-09, CSA C22.2 No. 60601.1:2008

9.4 Key to symbols

Important information
Warning: General risk points – check with the
instructions for use
Please note instructions for use
Compliance with Directives MDD 93/42 EEC
0123
Manufacturer
Unit type BF
The unit is subject to the stipulations of WEEE
Directive 2002/96/EC
Protection class II
IP21 IP21 drip-proof protection (Calypso Pro)

10. Transport / Storage / Disposal

For the transport and storage of your Calypso Pro unit, we recommend using the original packaging. We further recommend separate storage
protected from UV (e.g. sunlight/halogen lamps), heat and dust (Avoid storing or using the unit on a heater. Do not store or use the unit in a
dusty environment. Failure to observe these instructions can lead to the malfunction of the unit).
Transport and storage conditions
Temperature
Relative humidity
Air pressure
Disposal
Properly dispose of the device in accordance with local, state and federal regulations.
Questions: visit www.ardo-usa.com or call us at 844-411-ARDO (2736)
190 x 130 x 76 mm Classification in accordance with MDD93/42
75 x 46 x 31 mm Power adapter input voltage
0.545 kg Frequency
0.150 kg Regulated power adapter output
Class II Vacuum range
BF Permitted tolerance of the vacuum strength
800 hours Operating temperature
Relative humidity
41 °F to 104 °F (+5 °C to +40 °C)
30 - 75 %
700 - 1060 hPa
9.3 EMC Test records
See Page 10
IP20 drip-proof protection (power adapter)
IP20
Alternating current
Direct current
Temperature
P
Air pressure
RH
Relative humidity
Fragile, handle with care
Keep packaging away from heat
Keep packaging away from moisture
en
Class IIa
100 - 240 VAC ± 10 %
50 Hz / 60 Hz
9 Vdc, 1.4 A
50 - 330 mbar
± 5 %
41 °F to 104 °F
(+5 °C to +40 °C)
10 - 93 %
0123 0123
9