Blade Maintenance; Blade Replacement - sunjoe MJ401C-PRO Manual Del Operador

Maintenance + Care
m
WARNING!
Before cleaning, repairing or inspecting
the mower, disconnect the power supply by plugging out the
safety key and verify that all moving parts have come to a
complete stop.
General
• Always keep the mower clean and free of grass, dirt or
other debris.
• Keep the handles dry, clean and free of oil and grease.
• After each cutting session, remove accumulated grass
clippings and debris using either a dry cloth or handbrush.
You may also clean the equipment with a damp cloth and
some soft, non-abrasive soap. Do not use cleaning agents
or harsh solvents as they may damage the equipment's
plastic components. Make sure that no water penetrates
the equipment's interior as intake of water can destroy the
switch/plug mechanism and the electric motor.
• Do not clean the lawn mower with running water,
particularly with high-pressure water.
• Check all nuts, bolts and screws for proper tightness
before each use.
• Frequently inspect the grass collection bag assembly for
signs of wear and replace immediately with a genuine
Snow Joe + Sun Joe
® ®
• Replace excessively worn or damaged parts immediately.
• To maximize your mower's longevity, all screwed parts,
including the wheels and axles, should be cleaned and
lubricated. There are no parts inside the equipment which
require additional maintenance or lubrication.

Blade Maintenance

IMPORTANT: The mower blade is sharp and can cause severe
personal injury if handled incorrectly. Wrap the blade or wear
protective gloves, and use extra caution when handling.
The steel blade is designed to provide a fine cut in long or
tough grass. Deterioration in the quality of cut indicates blade
wear or damage. Follow these steps to determine if the blade
needs to be resharpened or replaced:
1. Disconnect the power supply to the mower by removing
the safety key.
2. Turn the mower on its side to expose the underside of the
blade housing.
3. Check the blade.
a. If the blade is blunt or has minor wear, then resharpen.
Contact an authorized Snow Joe
center.
b. If the blade shows signs of major wear or damage
(i.e. gouged, bent), replace. Please call Snow Joe
Sun Joe customer service for assistance at
®
1-866-SNOWJOE (1-866-766-9563).
part if damage is found.
+ Sun Joe service
® ®
m
WARNING!
that the blade is not properly balanced or has become
deformed from striking an object. In this case, the blade must
be repaired or replaced. Please follow the proper maintenance
procedures for blade care or call the Snow Joe
customer service center for assistance at 1-866-SNOWJOE
(1-866-766-9563).

Blade Replacement

IMPORTANT: Only use original replacement parts specified for
this mower.
You can purchase a replacement blade (Model MJ401C-BLD)
and other genuine replacement parts by visiting us online at
snowjoe.com or calling our toll-free customer service helpline
at 1-866-SNOWJOE (1-866-766-9563). The use of parts that
do not meet the original equipment specifications may lead to
improper performance of the lawn mower, may compromise
operator safety and will void the manufacturer's warranty.
1. Disconnect the safety key to the mower.
2. Turn the mower on its side to expose the underside of the
blade housing.
3. Use a cloth to grip the blade or wear heavy-duty gloves.
4. Using the spanner provided, remove the bolt and
the washer securing the blade by turning the bolt
counterclockwise, then carefully remove the blade
(Fig. 16).
Fig. 16
Spanner
+
®
12
An excessively vibrating mower indicates
Blade
+ Sun Joe
® ®