Intended Use; Assembly And Adjustments - DeWalt D28112 Manual De Instrucciones

COMPONENTS (Fig. 1, 2)
_ WARNING: Never modify the power tool or any part of it. Damage
or personal injury could result.
A. Paddle Switch
(D28402, D28402N)
B. Lock-Off Lever
C. Spindle Lock Button
D. Spindle (not shown)
E. Side Handle
F. 4-1/2" (114.3 mm) Grinding
Wheel
G. Anti-Lockup Backing Flange
H. Threaded Clamp Nut
I. Guard
J. Lock On Button (D28402)
K. Dust Ejection System TM
(DES)
L. Slider Switch (D28112)
INTENDED USE
The D28112, D28402 and D28402N heavy-duty angle grinders have
been designed for professional grinding at various work sites (i.e.,
construction sites). DO NOT use under wet conditions or in presence
of flammable liquids or gases.
These heavy-duty angle grinders are professional power tools. DO
NOT let children come into contact with the tool. Supervision is
required when inexperienced operators use this tool.
ASSEMBLY AND ADJUSTMENTS
_ WARNING: To reduce the risk of injury, turn unit off and
disconnect it from power source before installing and removing
accessories, before adjusting or when making repairs. Before
reconnecting the tool, depress and release the trigger switch
to ensure that the tool is off. An accidental start-up can cause
injury.
FIG. 1
D28402
D28402N
D28112
B
J
(D28402)