Assembly Instructions; Features; Control Panel - Schumacher Electric SEM-1562A-CA Manual Del Usuario

8.3 USING AN EXTENSION CORD
The use of an extension cord is not recommended. If you must use an extension
cord, follow these guidelines:
• Pins on plug of extension cord must be the same number, size, and shape as
those of plug on charger.
• Ensure that the extension cord is properly wired and in good electrical condition.
• Wire size must be large enough for the AC ampere rating of charger, as specified:
Length of cord (feet)
AWG* size of cord
*AWG-American Wire Gauge
9.

ASSEMBLY INSTRUCTIONS

9.1 Remove all cord wraps and uncoil the cables prior to using the battery charger.

10. FEATURES

2

11. CONTROL PANEL

LED DISPLAY
CLAMPS REVERSED (red) LED flashing: The connections are reversed.
CHARGING (yellow/orange) LED lit: The charger is charging the battery.
CHARGING (yellow/orange) LED flashing: The charger is in abort mode.
CHARGED (green) LED pulsing: The battery is fully charged and the
charger is in maintain mode.
NOTE: See Operating Instructions for a complete description of the charger modes.
25 50
18 18
1
3
• 8 •
100 150
18 16
1.
Ring connectors (quick-connect)
2.
Battery clamps (quick-connect)
3.
Battery status LEDs