Ninja BL682 Guia Del Usuario página 16

Assembly and Use of the Processor Bowl - cont.
USE
CHOPPING BLADE
ASSEMBLY
Fig. 1
USING THE CHOPPING BLADE ASSEMBLY
1 Review warning and caution statements on page 14
before proceeding to number 2.
2
Place the motor base on a clean, dry, level surface such
as a counter or table top. Press down on the motor
base to make sure that the suction cups adhere to the
counter or table top.
3
Secure the bowl onto the motor base.
4
Holding the Chopping Blade Assembly by the shaft,
place it onto the gear shaft inside the bowl. Ensure that
the Chopping Blade Assembly fits around the gear shaft
and that it is standing straight. (Fig. 1)
5 Add the ingredients and secure the bowl lid onto the
bowl.
6
Plug the power cord into the electrical outlet and press
on the power button ( ). Select the speed or Auto-iQ
program that best suits your needs. Pulse ingredients
for even chopping by holding the Auto-iQ Pulse button
until your desired consistency is reached.
NOTE: Please refer to "Speed Settings & Uses" chart
for suggested uses and speeds.
7 When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the blade to stop turning. (Fig. 2)
8
To remove the lid, press the release button on the lid
and pull the lid handle up to a 90° angle. (Fig. 2)
9
Turn the bowl counter-clockwise and lift it to remove it
from the motor base. (Fig. 3)
10 To release the motor base from the counter or table top,
place your hands underneath both sides of the motor
base and gently pull the unit up and towards you.
(Fig. 4)
15 1-877-646-5288
REMOVAL
Fig. 2 Fig. 3
™
Fig. 4
USING THE DOUGH BLADE ASSEMBLY
1 Review warning and caution statements on page 14
before proceeding to number 2.
2
Place the motor base on a clean, dry, level surface such
as a counter or table top. Press down on the motor
base to make sure that the suction cups adhere to the
counter or table top.
3
Secure the bowl onto the motor base.
4
Holding the Dough Blade Assembly by the shaft, place
it onto the gear shaft inside the bowl. Ensure that the
Dough Blade Assembly fits around the gear shaft and
that it is standing straight. (Fig. 5)
5 Add the ingredients and secure the bowl lid onto the
bowl.
6
Plug the power cord into the electrical outlet and press
on the power button ( ). Select the LOW/DOUGH
button and process until ingredients come together to
form a mass.
NOTE: Please refer to "Speed Settings & Uses" chart
for suggested uses and speeds.
7 Once finished making dough, stop the appliance by
pressing the power button ( ) and wait for the blade to
stop turning.
8
To remove the lid, press the release button on the lid
and pull the lid handle up to a 90° angle. (Fig. 2)
9
Turn the bowl counter-clockwise and lift it to remove it
from the motor base. (Fig. 3)
10 To release the motor base from the counter or table top,
place your hands underneath both sides of the motor
base and gently pull the unit up and towards you.
(Fig. 4)
USE
DOUGH BLADE
ASSEMBLY
Fig. 5