Assembly And Use Of The Nutri Ninja ® Cups - Ninja BL682 Guia Del Usuario

Ocultar thumbs Ver también para BL682:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Assembly and Use of the Nutri Ninja
WARNING: Handle the Pro Extractor Blades
WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be
damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the Pro Extractor Blades Assembly from the cup upon completion of blending. Some
ingredients have the potential to expand after blending resulting in excessive pressure buildup that can
pose a risk of injury.
IMPORTANT: Make sure that the motor base is plugged in for use.
ASSEMBLY
Fig. 2
Fig. 3
NOTE: Nutri Ninja
| Ninja
®
can sense which jar is on the motor base. The available
function lights will illuminate depending on which jar is placed
on the motor base. (Fig. 1)
1
Review warning and caution statements above before
proceeding to number 2.
2
Place the motor base on a clean, dry, level surface such as a
counter or table top. Press down on the motor base to make
sure that the suction cups adhere to the counter or table top.
3
Add ingredients to the Nutri Ninja cup.
4
Place the Pro Extractor Blades
screw it on clockwise until you have a good seal. (Fig. 2)
5
Turn the Nutri Ninja cup upside down and place it onto the
motor base, aligning the tabs on the cup with the motor base.
Rotate the Nutri Ninja cup clockwise until it locks in place, you
will hear a click when the lock is engaged. (Fig. 3)
6
Press the power button on, and select the speed or Auto-iQ
program that suits your needs. (Fig. 4) The Auto-iQ program
will stop the appliance automatically at the end of the
program.
®
Blender with Auto-iQ
Technology
®
onto the cup and tightly
®
Cups
®
Assembly with care, as the blades are sharp.
USE
Fig. 1
Fig. 4
7
To pause the appliance, press the selected speed or Auto-iQ
program a second time. When the program is paused, the
light on the program button will flash until you press it again
to resume the rest of the program.
8
Once you have reached your desired consistency, stop the
appliance by pressing the power button and wait for the blade
to stop turning. Turn the Nutri Ninja cup counter-clockwise
and pull straight up to remove. (Fig. 5, Fig. 6)
NOTE: Do not overfill! To avoid spilling, do not add ingredients
past the "Max Liquid" line.
9
Turn the cup upright and remove the Pro Extractor Blades by
twisting the Pro Extractor Blades counter clockwise.
10 Place the Sip & Seal
and enjoy!
11 Make sure that the motor base is unplugged when not in use.
12 To release the motor base from the
counter or table top, place your hands
underneath both sides of the motor
base and gently pull the unit up and
towards you.
REMOVAL
Fig. 5
lid onto the Nutri Ninja cup, twist to seal
®
www.ninjakitchen.com
Fig. 6
16

Publicidad

Tabla de contenido
loading

Tabla de contenido