Canon imageRUNNER ADVANCE C7580i Guía De Preguntas Frecuentes página 43

Do not disassemble or modify this machine.
•
There are high-voltage and high-temperature
components inside the machine. Disassembly
or modification may result in a fire or electrical
shock.
• Place the machine where children will not
come in contact with the power cord and
other cables or gears and electrical parts inside
the machine. Failure to do so may result in
unexpected accidents.
Do not use flammable sprays near this
•
machine. If flammable substances come into
contact with electrical parts inside this
machine, it may result in a fire or electrical
shock.
When moving this machine, be sure to turn
•
OFF the power of this machine, and then
unplug the power plug and interface cables.
Failure to do so may damage the power cord
or interface cables, resulting in a fire or
electrical shock.
When plugging or unplugging a USB cable
•
when the power plug is plugged into an AC
power outlet, do not touch the metal part of
the connector, as this may result in an electrical
shock.
Use a modular cable that is shorter than 3
•
meters.
• Use a USB cable that is shorter than 3 meters.
If the operating noise concerns you
Depending on the use environment and
operating mode, if the operating noise is of
concern, it is recommended that the machine be
Installed in a place other than the office.
If you are using a cardiac pacemaker
This machine generates a low level magnetic flux
and ultrasonic waves. If you use a cardiac
pacemaker and feel abnormalities, please move
away from this machine and consult your
physician immediately.
CAUTION
• Do not place heavy objects on this machine as
they may fall, resulting in injury.
For safety, unplug the power plug if the
•
machine will not be used for a long period of
time.
• Use caution when opening and closing covers
to avoid injury to your hands.
Keep hands and clothing away from the rollers
•
in the output area. If the rollers catch your
hands or clothing, this may result in personal
injury.
• The inside of the machine and the output slot
are very hot during and immediately after use.
Avoid contact with these areas to prevent
burns. Also, printed paper may be hot
immediately after being output, so use caution
when handling it. Failure to do so may result in
burns.
Feeder (only for products with a feeder)
Do not press down hard on the feeder when
•
using the platen glass to make copies of thick
books. Doing so may damage the platen glass
and result in personal injury.
• Close the feeder gently to avoid catching your
hands, as this may result in personal injury.
Close the feeder gently to avoid catching your
•
hands in the back of the feeder, as this may
result in personal injury.
Finisher (only for products with a finisher)
• Do not place your hands in the part of the tray
where stapling is performed (near the rollers),
especially pay careful attention to the sharp
staples, as this may result in personal injury.
Paper drawer (only for products with a paper
drawer)
Do not insert your hand into the machine
•
while the paper drawer is removed, as this may
result in personal injury.
Energy Saver key (only for products with an
Energy Saver key)
Press (Energy Saver) for safety when the
•
machine will not be used for a long period of
time, such as overnight. Also, turn OFF the
main power switch, and disconnect the power
cord for safety when the machine will not be
used for an extended period of time, such as
during consecutive holidays.
Laser Safety
This product is confirmed as a Class 1 laser
product in IEC60825-1:2014 and EN60825-1:2014.
CLASS 1 LASER PRODUCT
LASER KLASSE 1
APPAREIL À LASER DE CLASSE 1
APPARECCHIO LASER DI CLASSE 1
PRODUCTO LÁSER DE CLASE 1
APARELHO A LASER DE CLASSE 1
LUOKAN 1 LASER-TUOTE
LASERPRODUKT KLASS 1
The laser beam can be harmful to human bodies.
Since radiation emitted inside the product is
completely confined within protective housings
and external covers, the laser beam cannot
escape from the machine during any phase of
user operation. Read the following remarks and
instructions for safety.
Never open covers other than those instructed
•
in the manuals for this machine.
• If the laser beam should escape and enter your
eyes, exposure may cause damage to your
eyes.
CAUTION
Use of controls, adjustments, or performance of
procedures other than those specified in this
manual may result in hazardous radiation
exposure
Other precautions
• Follow the instructions on the caution label
attached to this machine.
Do not subject the machine to strong shocks
•
or vibration.
• Do not forcibly open and close doors, covers,
and other parts. Doing so may result in
damage to the machine.
• Do not turn the main power switch OFF or
open the covers while the machine is in
operation. This may result in paper jams.
Maintenance and Inspections
Clean this machine periodically. If dust
accumulates, the machine may not operate
properly. When cleaning, be sure to observe the
following. If a problem occurs during operation,
see "Troubleshooting" in the User's Guide.
WARNING
• Before cleaning, turn OFF the power and
unplug the power plug from the AC power
outlet. Failure to do so may result in a fire or
electrical shock.
• Unplug the power plug periodically and clean
with a dry cloth to remove dust and grime.
Accumulated dust may absorb humidity in the
air and may result in a fire if it comes into
contact with electricity.
Use a damp, well wrung-out cloth to clean the
•
machine. Dampen cleaning cloths with water
only. Do not use alcohol, benzenes, paint
thinners, or other flammable substances. Do
not use tissue paper or paper towels. If these
substances come into contact with electrical
parts inside the machine, they may generate
static electricity or result in a fire or electrical
shock.
Check the power cord and plug periodically
•
for rust, bent prongs, fraying, cracks, or
excessive heat generation. Use of poorly-
maintained power cord or plug may result in a
fire or electrical shock.
CAUTION
• The inside of the machine has high-
temperature and high-voltage components.
Touching these components may result in
injury or burns. Do not touch any part of the
machine that is not indicated in the manual.
• When loading paper or removing jammed
paper, be careful not to cut your hands with
the edges of the paper.
Legal Limitations on the Usage of Your
Product and the Use of Images
Using your product to scan, print or otherwise
reproduce certain documents, and the use of
such images as scanned, printed or otherwise
reproduced by your product, may be prohibited
by law and may result in criminal and/or civil
liability. A non-exhaustive list of these
documents is set forth below. This list is intended
to be a guide only. If you are uncertain about the
legality of using your product to scan, print or
otherwise reproduce any particular document,
and/or of the use of the images scanned, printed
or otherwise reproduced, you should consult in
advance with your legal advisor for guidance.
• Paper Money
• Travelers Checks
Money Orders
•
• Food Stamps
• Certificates of Deposit
Passports
•
Postage Stamps (canceled or uncanceled)
•
• Immigration Papers
• Identifying Badges or Insignias
Internal Revenue Stamps (canceled or
•
uncanceled)
• Selective Service or Draft Papers
• Bonds or Other Certificates of Indebtedness
Checks or Drafts Issued by Governmental
•
Agencies
• Stock Certificates
Motor Vehicle Licenses and Certificates of Title
•
Copyrighted Works/Works of Art without
•
Permission of Copyright Owner
Safety-Related Symbols
Power switch: "ON" position
Power switch: "OFF" position
Power switch: "STAND-BY" position
Push-push switch "ON"
Protective earthing terminal
Dangerous voltage inside. Do not open
covers other than instructed.
CAUTION: Hot surface. Do not touch.
Class II equipment
Moving parts: Keep body parts away from
moving parts
CAUTION: An electrical shock may occur.
Remove all the power plugs from the power
outlet.
There are sharp edges. Keep body parts
away from sharp edges.
[NOTE]
Some of symbols shown above may not be
affixed depending on the product.
"OFF"
43